I can't decide if I'm getting less voltage than BIOS is set to or if MBM5 is reading low. I had it set to 1.7 for overclocking but MBM5 was only reading 1.66 and now that it's back to stock it's only reading @1.6

Anyone know what rail the NF7-S uses for CPU and how to test that rail?

hmmm...the NF7-S has a 4-pin 12V aux power connector, IIRC, so it might be the 12V-rail...

Some mobos do undervolt - i have to set my 7NJS about .025-.05V higher to get the VCore i want.(e.g. i have to set it to 1.8V in BIOS to actually get 1.75V Vcore).

-------------------------
The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.

---

<center><font color=red>MODERATOR</center></font>

---

AMD Athlon 64 X2 6000+ 89W :: Asus M2N32SLI Deluxe :: 2x1024MB Muskin XP2-6400 DDR2-800 :: BeQuiet! Darkpower Pro 530W :: 2x WD Raptor 74GB/10k rpm, RAID 0 :: ATI Radeon X1950XTX

Thats funny, cause mine tends to overvolt, in the bios its at 1.65 but irl its like 1.68. And I got a really good psu too, don't what it is, but I don't mind it very much.

-------------------------
Life is hard you know this $hit gets taxin,
Thats why when ya find me Ima be relaxin...