I'm reading the specs on the Maxtor Atlas 15K II SAS Hard Drive and it says the interface is "2 x 7-pin SAS SAS 300 Serial Attached SCSI".
What is that? I thought SAS's were SCSI's that could plug into a SATA or SATAII connector? Also I didn't see that the SAS had NCQ, I thought they did?
I'm basically trying to compare these:
36.7GB Maxtor Atlas 15K II SAS Hard Drive Specs Here
36.7GB Hitachi Ultrastar 15K147 HUS151436VL3800 Hard Drive Specs Here
Can someone please help me out on this? Lol, thanks...
I also noticed Hitachi also has an SAS drive listed on that same Hitachi Spec page. Err I'm so confused on this....
AMD Phenom II X4 955BE AM3 (Multi firstname.lastname@example.orgMHz) - 965BE On order!
Thermalright IFX-14 Lapped with AS5 (Not installed)
3 Scythe SY1425SL12H / Silverstone FP33-B (Not installed)
ASUS M4A78T-E AM3 790GX HDMI ATX
8GB Mushkin 996625 DDR3 1600 (7-7-6-18-24 - DRAM 1.86v)
Corsair CMPSU-750HX ATX12V 2.3 Modular
3 74GB WD Raptors in RAID 0 / 1TB WD Black
Pioneer SATA Blu-Ray / Plextor SATA DVD-RW