Ok I notice my computer was a little slow So I though it could be the memory because My computer cpu muli is at 10.5 (100*10.5=1050Mh)zand I remember that you shouldn't have half muli because of the memory issue so here the question what you think would have the best thing I though I should up the muil to 12 that way the memory (266) would divide even into it so it would have 1200/133.33 = about 9/1 ratio think this is ok?? Not sure if I can mess with the muli so I'll have to check today. I'll have to give the model number of the processor. I just hope this processor will handle the increase.

Ok I ckecked my processor and It's really 1050 so the multiplier is really 10.5 so Here's the plan I'll lower the multiplier to 10 making the core more stable and instead of having the memoery at 133 I can bring it up to 166.66Mhz So that it will be a 6to1 ratio.... any ideals out there?? The memory is ddr400 but the boards can only handle 166Mhz.

Does anyone have any clue lol?? Or does this not make sense.

quote:

---

Originally posted by: Unknown does this not make sense

---

i think so.. never heard that the fraction in the multi causes memory problems..

-------------------------

Some where I that the their is to be a ratio between the cpu and memory cycles but I forgot where