well bassically i have a DFI NF4 UT Board and i didnt want my cpu fan turning of at 25c so i put cpu fan straighnt to power using 3pin to 4 pin molex anyway i put back fan on the cpu pin fan
the cpu fan was spinning full for last few months but now it runs slower speeds up runs slow (Fan on Cpu) Not the one i plugged on motherboard C nq is off always has been so is my cpu fan dieing do you think?
or is just more power now again speeding the fan up?
im not worried about temps are normally 26-36 max so, but i would likwe to know if it is going out as i can get new fan or new heatsink and fan ready aswell as getting chipset cooler ready also.
Is it the stock AMD fan and HS, if it is the stock fan then im not surprised if it is dying. The fan on my san diego died right before i got my opteron. I was notified by lots of beeps from the system speaker when the CPU got to round 60...RIP AMD fan
PS-this reminds me that i have to take some news pics of my rig....not much change but a few things changed
Current Desktop: Intel Core i7 860 | WD Velociraptor 300GB x 2 RAID 0 Asus P7P55D-E Premium | WD Caviar 1TB XFX Radeon HD 5870 1GB GDDR5 G.Skill 8GB DDR3 1600 | Asus Xonar D2X Logitech G15 Keyboard | 2x Samsung 24" LCD Flatpanel