hi guys i am gonna post my Rigs pics not a gr8 rig but seriously i am given too much time to it ......for modding ....... and here india modding is really difficult thing to do ...... i have done all things on my own without any ELECTRONIC equipment because its really hard to find them here .....as i live in a small town.......

ok this is the 1st pic where i have done some of cable management don't know how it looks but had given some time to it ........
Cabling' ">http://server3.uploadit.org/files/rahul3111-cabling.JPG



This is the pic of the cutting marks i have made ....this is the one for fan on the side but the glass cutting man said it is not possible as they don'y have equipment(for this small hole in 2mm glass) and i don't have any idea how to cut round hole with a simple glass cutter so the idea was droped.........
Cutting marks' ">http://server3.uploadit.org/fi...l3111-cuttingmarks.jpg


This the pic of the small fan i have fitted on the NB of my K8N this is small fan but cuts the temp around 8*C ......so this is nice.....
Fan Front' ">http://server3.uploadit.org/fi...rahul3111-fanfront.JPG
Fan Side' ">http://server3.uploadit.org/files/rahul3111-fanside.JPG


This is my complete setup.....looks good ....wat u all say........actually i am currently workin on lights but not getting any luck.....lets see....
Complete' ">http://server3.uploadit.org/fi...rahul3111-complete.JPG

hope u guys like the pics
sorry for blurry pics but i shot them with my 7610(DIGI cam i lost it on the beach ) .......hope to get a new one soon


This is my desktop which i have converted to MAC os type isn't it looks good
Desktop' ">http://server3.uploadit.org/files/rahul3111-desktop.jpg

-------------------------
The GOOD ASUS A7N8X Deluxe Rev 2.0 | Barton 2500@220x11FSB | KingsTon 2x256 MB PC3200 | FX5200Ultra(325/500) | Audigy2 | Creative 5.1 THX Certified
The BAD MSI K8N NEO PLATINUM | 2800+Clawhammer@260x9FSB | ASUS StarIce | 2x256 MB PC<

Modding is in the heart bro... sometimes, having a full wallet and lots of tools/places to buy from will ruin a mod! So... cheers to you for modding what you got with what you got!

Cabling looks good!
Just answer me this... if you were going to trick out that case the way you would like to, would you be sleeving? using lights? different fans? what colors?

What would you like to do to that case, that would not require the use of power tools?

Also, what is the voltage of your wall sockets where you live?

QUOTE (Tech-Daddy @ Mar 9 2005, 03:22 AM) Modding is in the heart bro... sometimes, having a full wallet and lots of tools/places to buy from will ruin a mod! So... cheers to you for modding what you got with what you got!

Cabling looks good!
Just answer me this... if you were going to trick out that case the way you would like to, would you be sleeving? using lights? different fans? what colors?

What would you like to do to that case, that would not require the use of power tools?

Also, what is the voltage of your wall sockets where you live?

thanxxx buddy for all ur gr8 words....really like that....

if i will get tools first i will get a big case.....then i will put some UV light and uv cables.....also i will get a LCD for the cd drive bay which can give me CPU speed and some data..........i will go for blue or red color.......

i also get some cooling for my CPU and GPU........

i am trying for water cooling but no luck

we get 220V as standard in India.......



-------------------------
The GOOD ASUS A7N8X Deluxe Rev 2.0 | Barton 2500@220x11FSB | KingsTon 2x256 MB PC3200 | FX5200Ultra(325/500) | Audigy2 | Creative 5.1 THX Certified
The BAD MSI K8N NEO PLATINUM | 2800+Clawhammer@260x9FSB | ASUS StarIce | 2x256 MB PC<

Are yaar....
JUST TELL ME ONE THING.. how did u cut that KAALA cabinet?? and is that a Plexiglass u've used on its sides??
Where did u find the tools for doin this stuff??

Mein Ajmer min rehta hoon aur I DESPERATELY want to mod my thing But NO TOOLS... Even if i cut my case... NO FANS.. NO LIGHTS...

GURUDEV.. MUJHE GYAAN KA PATH DIKHAYEN. MERA SAHI MODDING KI ORE MARGDARSHAN KAREN>

DHANYAWAAD

:-)

keep up the modding looks like you had some fun doing those mods

-------------------------
YOU CAN RUN. . . .YOU'LL JUST DIE TIRED
Athlon64 3500+ NewCastle Thermaltake Venus 12 HSF Lapped and useing Arctic Silver 5,Antec NeoPower 480 PSU,Pioneer DVD burner
DFI LANPARTY UT nF4 Ultra-D
TWINX1024-3200XL latency values of 2-2-2-5
ATI Radeon X800 256mg (256bit memory interface)
2 120GB Seagate Barracuda 7200.7 SATA in RAID 0

ya man modding was really fun.....but some times it was really frustrating ....like u have right ideas in mind but can't implement the beacase lack of tools .......so anyways it looks good but i am not getting any lights for it.......grrrr............

-------------------------
The GOOD ASUS A7N8X Deluxe Rev 2.0 | Barton 2500@220x11FSB | KingsTon 2x256 MB PC3200 | FX5200Ultra(325/500) | Audigy2 | Creative 5.1 THX Certified
The BAD MSI K8N NEO PLATINUM | 2800+Clawhammer@260x9FSB | ASUS StarIce | 2x256 MB PC<

man what tools do you need??? let me know and i'll tell you the substitute.

-------------------------

Basically if you are getting a LCD, get one with a good contrast and brightness ration-->BVchurch @ Jan 30 2005, 12:53 PM
Why don't you post links rather than bossing people around.@Max Axe-->danm

QUOTE (Max Axe @ Mar 20 2005, 03:25 AM) man what tools do you need??? let me know and i'll tell you the substitute.
i need a tool to cut a 0.5mm glass in round shape .....can u help....

-------------------------
The GOOD ASUS A7N8X Deluxe Rev 2.0 | Barton 2500@220x11FSB | KingsTon 2x256 MB PC3200 | FX5200Ultra(325/500) | Audigy2 | Creative 5.1 THX Certified
The BAD MSI K8N NEO PLATINUM | 2800+Clawhammer@260x9FSB | ASUS StarIce | 2x256 MB PC<

QUOTE (rahul3111 @ Mar 20 2005, 04:24 AM) i need a tool to cut a 0.5mm glass in round shape .....can u help....
Just take it to your local glass shop, and the guy will ask you for not more than 40 bucks and will do the job for you. Simple enough ?

If you want to do it yourself, simply buy a similar glass cutter from a hardware shop tie a thread to it, put it in the center of the glass and after decieding the radius of the circle you can easily cut it into the desired size.
This way it will be a job completely done by you.

And plexi glass is available in India, just ask for it as a plastic glass. You'll be amazed to find how many shops store them

-------------------------

Basically if you are getting a LCD, get one with a good contrast and brightness ration-->BVchurch @ Jan 30 2005, 12:53 PM
Why don't you post links rather than bossing people around.@Max Axe-->danm

Would recommend edging for that glass cut if that is what you use...

That stuff will be sharp!

thanks dude ....but i have to cut it first.....still no luck......i think i will get a new case....

-------------------------
The GOOD ASUS A7N8X Deluxe Rev 2.0 | Barton 2500@220x11FSB | KingsTon 2x256 MB PC3200 | FX5200Ultra(325/500) | Audigy2 | Creative 5.1 THX Certified
The BAD MSI K8N NEO PLATINUM | 2800+Clawhammer@260x9FSB | ASUS StarIce | 2x256 MB PC<