Topic Title: need dimensions for nylon spacers (am2 apogy watercooling block) Topic Summary: no spacers provided for mounting my water block id like to make them from nylon tubing Created On: 05/22/2008 10:48 AM Status:
Read Only
walsterdoomit Junior Member
Posts: 2
Joined: 05/18/2008
hi folks, id like to make some spacers for my apogy water cooling block and the backing plate. i bought my case with the parts, but i didnt get any spacers. i can order them sure ...but , i am a handy person and can make them...i am just unsure what the size is....can someone measure one of those little critters? thanks in advance!
If you are talking about the gasket thing that goes between the backing plate on the back side of the motherboard mine came with 2 styles, one was foam that was about 1/8 of an inch thick, then another that was less than 1/16 of an inch that was make out of some kind of compressed cork type of material with a paper layer on it.
Good luck
Search Topic
05/22/2008 10:48 AM
