AMD Processors
Decrease font size
Increase font size
Topic Title: need dimensions for nylon spacers (am2 apogy watercooling block)
Topic Summary: no spacers provided for mounting my water block id like to make them from nylon tubing
Created On: 05/22/2008 10:48 AM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 05/22/2008 10:48 AM
User is offline View Users Profile Print this message

Author Icon
walsterdoomit
Junior Member

Posts: 2
Joined: 05/18/2008

hi folks, id like to make some spacers for my apogy water cooling block and the backing plate. i bought my case with the parts, but i didnt get any spacers. i can order them sure ...but , i am a handy person and can make them...i am just unsure what the size is....can someone measure one of those little critters? thanks in advance!

walt
 05/22/2008 02:35 PM
User is offline View Users Profile Print this message

Author Icon
geezer_wheelz
Elite

Posts: 1462
Joined: 09/23/2006

If you are talking about the gasket thing that goes between the backing plate on the back side of the motherboard mine came with 2 styles, one was foam that was about 1/8 of an inch thick, then another that was less than 1/16 of an inch that was make out of some kind of compressed cork type of material with a paper layer on it.
Good luck

-------------------------
Asus M4A79 Deluxe, Phenom II 940 BE, 20,770 3D06

Asus Moderator ~ My CPU Overheating Guide
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information