I have installed WIN XP64 and downloaded all drivers from ECS website for my motherboard.
http://www.ecs.com.tw/ECSWebSi...uID=124&LanID=0
Everything went smooth and working except for the following:
Nvidia MCP78 VGA Driver (Win64)
NVDIA Display Driver(winxp64)
When I run set-up for both, my PC reboots midway and nothing is installed.
My set-up already have an HD4890 in the PCIe slot and I have installed the driver for this and its working. But I also want to install the driver for the 8200GT on board so that I can have multiple displays working ( 2 display from HD4890 + 2 displays from on board 8200GT ) I already set the graphics in the BIOS to enable both and I can see them in the device manager. But every time I run the two display drivers above, my PC reboots as stated. I tried manually updating the coprocessor driver and pointing to the folders of the two above drivers, but the result is the same. It enters into set up then reboots the PC midway.
Looking forward to any advice how to fix this. Thanks!
-------------------------
MSI 790FX-GD70;AMDX3 720BE 4cores;Xigmatek-SD964;HIS HD4890 1GB iCoolerX4;4GB G.Skill DDR3 1600;2x500GB WD Black in RAID0; Corsair 620HX;Case AZZA Helios 910;Logitech Z-5500 5.1; 32"LG FullHD LCDTV; Samsung 17" 743NX
Edited: 11/04/2009
at 06:41 PM
by randomkid