For me, the C&Q tab never appears on the power options dialog box.

I've done the two BIOS settings (enable C&Q, yes to acpi 2.0 support) and I've installed the 1.0.1.7 driver and the latest C&Q app, but no joy.

Athlon 64c 3200
Asus K8VSE dlx
Win ME

Habve you tried the Latest AMD 64 Driver,...>>>>http://www.amd.com/us-en/Proce...chni...71_9706,00.html' ">http://www.amd.com/us-en/Proce...0_182_871_9706,00.html

-------------------------
AN9 32x AM2 4600+ / KV8 MAX3 AMD 64 3400+/ AT7 MAX2 Barton 3800+

Make sure you set 'Performance Mode' to 'Auto' in in BIOS(you can find this setting in Advanced -> JumperFree Configuration).

-------------------------
The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.

---

<center><font color=red>MODERATOR</center></font>

---

AMD Athlon 64 X2 6000+ 89W :: Asus M2N32SLI Deluxe :: 2x1024MB Muskin XP2-6400 DDR2-800 :: BeQuiet! Darkpower Pro 530W :: 2x WD Raptor 74GB/10k rpm, RAID 0 :: ATI Radeon X1950XTX

Yep, I have performance mode on auto, and I still don't get the C&Q tab in power options.

And Ricky, I think the AMD drivers are just for XP. I'm running ME on this box.

Anyone think of anything else I should try?

There is a Version on the same page for ME....AMD Athlon™ 64 Cool'n'Quiet Software for Windows ME and Windows 2000, Version 1.0.1.7

-------------------------
AN9 32x AM2 4600+ / KV8 MAX3 AMD 64 3400+/ AT7 MAX2 Barton 3800+

QUOTE (bascule @ May 18 2004, 11:51 PM)
I've done the two BIOS settings (enable C&Q, yes to acpi 2.0 support) and I've installed the 1.0.1.7 driver and the latest C&Q app, but no joy.

As I said...

Well do not feel bad does not work here either, It works on XP but the board sets of a Siren when enabled in BIOS you can boot to OS and all seems fine other than Bleeping non stop and no overheating or fan issues I think something is realy messed up....

-------------------------
AN9 32x AM2 4600+ / KV8 MAX3 AMD 64 3400+/ AT7 MAX2 Barton 3800+