AMD Processors
Decrease font size
Increase font size
Topic Title: what are your voltages
Topic Summary:
Created On: 10/31/2003 05:37 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 10/31/2003 05:37 PM
User is offline View Users Profile Print this message

Author Icon
[borg]
Senior Member

Posts: 528
Joined: 10/07/2003

write your voltages and temps... and why do you keep it so high/low

my sig processor is now running at 1.85vcore
I'm beggining to think it's growing more voltage-hungry over time, definetly not a good sign... it's just now stable at lower voltages, it was stable at 1.8v a week ago
If it get's out of control, it's getting back to 2200Mhz and 1.7 range
temps are about 45C at load

-------------------------
Barton 1833@2200 (11.0x200) AQXEA 0329 XPMW 1.75vcore
NF7-S rev2.0 + 2x512 DDR 400Mhz + SLK-947U + TT SF II
FX5600 256 DDR 350/450
 10/31/2003 06:15 PM
User is offline View Users Profile Print this message

Author Icon
BEENTHERE
Senior Member

Posts: 1079
Joined: 10/10/2003

OK, I wrote down my voltages and temps.

Thanks



-------------------------
If only they knew...
 10/31/2003 07:33 PM
User is offline View Users Profile Print this message

Author Icon
Hikari
Member

Posts: 48
Joined: 10/06/2003

My JIUHB is originally 11x133 @ 1.6V and is rinning at 10.5x180 @ 1.55V and 45-52º
Over 2000 ir requires more than 1.75V and reached 69º, so I didn´t force it, not even tested the stability.

My mobo is a Chaintech 7NJS with a Volcano 6Cu.
 11/01/2003 01:42 AM
User is offline View Users Profile Print this message

Author Icon
Drisler
Member

Posts: 111
Joined: 10/06/2003

barton 2500+ >> 1.825v 39c LOAD.
barton 2600+ >> 1.725v 45c LOAD.
1700+ >> 1.60v 40c LOAD.

-------------------------
DFI nFII Ultra Infinity
Barton 2800+ [ 250 x 10 , 2.0V ] , SP-97
Mushkin Black Level II PC3500 [ 3.2V , 11-2-2-2.0 ]
Radeon 9700 Pro , WD360 Raptors [Raid 0]
Antec TC 550 , Klispch ProMedia 4.1

DLT3C 1800+ , 8rda+ , HyperX PC3000 BH-5
 11/01/2003 01:50 AM
User is offline View Users Profile Print this message

Author Icon
brian_brian
Senior Member

Posts: 956
Joined: 10/07/2003

My AXDA2500DKV4D ----> 1.80 V 45C FULL LOAD
My AXDA2400DKV3C ----> 1.75 V 39C FULL LOAD

With ThermalRight SLK 900U + CoolerMaster Jet 7

-------------------------
ABIT IC7MAX3, AN7, & NF7-S REV2.0
Intel P4 3.2EE, AMD Barton 2.6 & 2.5 with WD Raptor 74Gb E 3 Pc's
Thermaltake skull vm3000a, Antec Sonata & Plus View 1000AMG
2 Pc's Creative 2ZS Platinum Pro with Inspire 7700 & Klipsch Promedia 5.1 Pro
Sony SDM-HS93, SDM HS53 & Multiscan20se
Cisco 2503 with ISDN 128 Kbps & Cisco 837 with Zyxel Prestige 630 ADSL 512Kbps
 11/01/2003 03:17 AM
User is offline View Users Profile Print this message

Author Icon
checkman
Member

Posts: 26
Joined: 10/31/2003

DURON 1.1 OC 1.466 1.75V

-------------------------
DURON 1.1 OC 1.466
ASUS A7V133-C 1.05.
MT mBGA 256MB SD
IBM 7K250
ACER 650P
PHILIPS 8432 (HUNGURY)
MGA G400 16M SD (99')
DIAMOND S70
3COM 905TX
MISUMI 1.44M
PHILIPS 15A
SGI USB
SUNFLOWER
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information