write your voltages and temps... and why do you keep it so high/low

my sig processor is now running at 1.85vcore
I'm beggining to think it's growing more voltage-hungry over time, definetly not a good sign... it's just now stable at lower voltages, it was stable at 1.8v a week ago
If it get's out of control, it's getting back to 2200Mhz and 1.7 range
temps are about 45C at load

-------------------------
Barton 1833@2200 (11.0x200) AQXEA 0329 XPMW 1.75vcore
NF7-S rev2.0 + 2x512 DDR 400Mhz + SLK-947U + TT SF II
FX5600 256 DDR 350/450

OK, I wrote down my voltages and temps.

Thanks



-------------------------
If only they knew...

My JIUHB is originally 11x133 @ 1.6V and is rinning at 10.5x180 @ 1.55V and 45-52º
Over 2000 ir requires more than 1.75V and reached 69º, so I didn´t force it, not even tested the stability.

My mobo is a Chaintech 7NJS with a Volcano 6Cu.

barton 2500+ >> 1.825v 39c LOAD.
barton 2600+ >> 1.725v 45c LOAD.
1700+ >> 1.60v 40c LOAD.

-------------------------
DFI nFII Ultra Infinity
Barton 2800+ [ 250 x 10 , 2.0V ] , SP-97
Mushkin Black Level II PC3500 [ 3.2V , 11-2-2-2.0 ]
Radeon 9700 Pro , WD360 Raptors [Raid 0]
Antec TC 550 , Klispch ProMedia 4.1

DLT3C 1800+ , 8rda+ , HyperX PC3000 BH-5

My AXDA2500DKV4D ----> 1.80 V 45C FULL LOAD
My AXDA2400DKV3C ----> 1.75 V 39C FULL LOAD

With ThermalRight SLK 900U + CoolerMaster Jet 7

-------------------------
ABIT IC7MAX3, AN7, & NF7-S REV2.0
Intel P4 3.2EE, AMD Barton 2.6 & 2.5 with WD Raptor 74Gb E 3 Pc's
Thermaltake skull vm3000a, Antec Sonata & Plus View 1000AMG
2 Pc's Creative 2ZS Platinum Pro with Inspire 7700 & Klipsch Promedia 5.1 Pro
Sony SDM-HS93, SDM HS53 & Multiscan20se
Cisco 2503 with ISDN 128 Kbps & Cisco 837 with Zyxel Prestige 630 ADSL 512Kbps

DURON 1.1 OC 1.466 1.75V

-------------------------
DURON 1.1 OC 1.466
ASUS A7V133-C 1.05.
MT mBGA 256MB SD
IBM 7K250
ACER 650P
PHILIPS 8432 (HUNGURY)
MGA G400 16M SD (99')
DIAMOND S70
3COM 905TX
MISUMI 1.44M
PHILIPS 15A
SGI USB
SUNFLOWER