I got a couple of questions for you guys out there. First is, I saw another person wrote about this combination earlier and they were told to set the jumper settings to pins 1-2 which is the 200 setting.(vs 2-3 which is 266/333). i understand the logic behind this but should only be done if you are running your ram in dual mode or should have it set that way when I have only one stick of ram.
Also is there a program that shows you the actual fsb speed your chip is running at. I know you can set them in the bios but I wonder if Im actually getting those numbers.
Thanks for your help
When using memtest my cpu fsb is listed at 199mhz and ram is listed at 199mhz does this sound right Im unfamiliar with these things I guess.
a7n8x deluxe 2.0pcb bios 1008 kingston pc3200 512 ram<-- Im switching htough do to problems to corsair amd 3200+XP