Hi nethkenneth, and Welcome to the Forum!
In this article/review from TweakTown you will find some excellent suggestions for the overclocking capabilities of your motherboard on page 3...
http://www.tweaktown.com/docum...dTyp...=review&dId=642' ">http://www.tweaktown.com/docum...p?dType=review&dId=642
It looks to me, from reading that review, that you have made a very good choice in a motherboard for overclocking.
However, your choice of memory leaves a lot to be desired.
You are using DDR333 (which is 'rated' for 166 MHz), with a 200MHz/400DDR processor (your XP 3200+ runs at 200MHz in 'stock' form)
From the review, I picked out this little gem...
QUOTE During our tests, we lowered the CPU multiplier and raised the FSB with the DRAM at 1:1 and managed over 267MHz FSB without a problem.
Judging from that, if you hope to get the most out of your board / CPU combination, then you are going to need much better memory... like PC4200 = DDR533 = 266Mhz as a minimum.
Read the article that I link to above, page 3 in particular, and then come back with questions, Okay?
Do you know whether your XP 3200+ is 'Super-locked' or not?
Anything made after '03/40th week is 'Super-locked'
-------------------------
Here is my new PCChips M848A' ">http://img.photobucket.com/alb...2_T-2-3-3-6-2_M848.jpg v2.1, with a 1700+ @ 2411 MHz, and my trusty old PCChips M810L' ">http://members.lycos.co.uk/mmm...00MHz_Sandra_tests.jpg v7.1A, with a Barton 2500+ @ over 3500+. Some of my fancy cars are on this pag