Silk_the_Absent1 Senior Member
Posts: 15221
Joined: 02/02/2004
Yes, but it would basically underclock the chip, as the cpu uses a FSB of 166 (333DDR), while the rame runs @ 133 (266DDR). If you have the ability to run the FSB and ram asynch in the bios you can try, but a lot of times that can cause instability. Best bet - get some PC2700 or faster.
MD - Moderator Deployer of Mjölnir - House Keeping
Posts: 11102
Joined: 11/05/2003
QUOTE (bro_bear @ Sep 19 2004, 06:59 AM) so I can use 256 MB Kingston DDR266 Ram on Abit NF7 with AMD Sempron 2200? Botton line: Memory: PC3200 = DDR400 memory is required when setting the FSB clock to 200. 400 Bus. PC2700 = DDR333 memory is required when setting the FSB clock to 166. 333 Bus. PC2100 = DDR266 memory is required when setting the FSB clock to 133. 266 Bus. PC1600 = DDR200 memory is required when setting the FSB clock to 100. 200 Bus.
MD
------------------------- The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.
Physics? Ha! This is clearly magic and devilry at work. Prepare firewood! We have witches to burn!
Search Topic
09/19/2004 10:59 AM
