AMD Processors
Decrease font size
Increase font size
Topic Title: 2200+ Sempron and K7VTA3 ECS Board Having problems
Topic Summary:
Created On: 09/21/2004 11:39 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 09/21/2004 11:39 PM
User is offline View Users Profile Print this message

Author Icon
[KTA]KeItO
Junior Member

Posts: 1
Joined: 09/21/2004

Hello,

Recently I have bought a brand new AMD Sepron 2200+ and a K7VTA3 board made by ECS. I wiped my hard drive and installed windows again and the drivers for the board. Then I went to check my system settings and noticed that it says it was running at 900mhz. I went and opened up my case and set the FBS jumpers to 166. When I started up my computer the computer wouldent start. This is my problem. Please help me if you know what I need to do.
 09/22/2004 12:26 AM
User is offline View Users Profile Print this message

Author Icon
JHawk56
Elite

Posts: 1084
Joined: 07/27/2004

Hello, welcome to the forum!

Some of the ECS and PCCHIPS boards with VIA chipsets don't like to run right at the standard 166 FSB setting. Try a slight overclock of 175 FSB by making an adjustment in the BIOS. That often takes care of it.

(Obviously this will only work if the system will run enough to get into BIOS setup. The boards I described will start at 166 but aren't stable at that speed.)

John

-------------------------
My ECS/PCCHIPS/Amptron PCs<br>ASRock K7VM2
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information