hi all
i have a Mboard QDI KuDoz7E/333A and i want to know if AMD SEMPRON 2600+
or highter working on my Mboard

---------------------------------------------------------------------------------------------
my manual say: Support Socket A AMD Athlon , AthlonXP and Duron Processors
AMD AthlonXP 1500+/1600+/1700+/1800+/1900+/2000+/2100+/2200+/2400+/2600+
AMD Athlon 650/700/750/800/850/900/950/1000/1000-266/1100/1133-266/1400/1400-266
AMD Duron 600/650/700/750/800/850/900/950/1000/1100/1200/1300
---------------------------------------------------------------------------------------------
now i have Athlon XP 2000+

thanks for help

http://www.qdigrp.com/qdisite/...oducts/Kudoz7e333a.htm' ">http://www.qdigrp.com/qdisite/...oducts/Kudoz7e333a.htm

NOTE: VIA KT333CF, the chipset is rated for 333 bus operation. Sempron MAY work, but I wouldn't say it would work at full 333 bus speed.

Also found this:

QDI forum
http://www.qdigrp.com/qdisite/...show...orum_id=2&page=' ">http://www.qdigrp.com/qdisite/...24924&Forum_id=2&page=

QUOTE Unfortunately, the Kudoz 7E/333A mainboard has an old microcode. Therefore the Sempron CPU is not recognized correctly.
This is also a reason, why the CPU is a bit "underclocked". (The Sempron 2300+ runs at 1583MHz, not 1,27GHz)

You should usually not have any problems, to run this CPU, since Sempron CPUs are modified AMD Athlon XP CPUs.


So it does work, but as I said before, not at rated speed, it will also probably be an unknown cpu...

-------------------------
The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.

Physics? Ha! This is clearly magic and devilry at work. Prepare firewood! We have witches to burn!


MODERATOR

if i try buy Semptron 2600 ,i will see big deferent Speed from Athlon 2000+
or is not important.??

thanks