AMD Processors
Decrease font size
Increase font size
Topic Title: help please
Topic Summary: no video
Created On: 03/06/2009 06:36 AM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 03/06/2009 06:36 AM
User is offline View Users Profile Print this message

Author Icon
bobbylee
Junior Member

Posts: 1
Joined: 03/06/2009

i have a biostar 6100m7 borad with sempron3000 cpu and kinston 1gig memory chip. borad light up and key borad flash theri all three new parts but i have no video. i would be glad for some advice
 03/10/2009 09:50 AM
User is offline View Users Profile Print this message

Author Icon
go_for
Alpha Geek

Posts: 3217
Joined: 01/21/2006

-disconnect power plug from PSU. Do a clear CMOS using jumper on motherboard. See motherboard manual.

If it does not help, try with a minimal build. Motherboard, CPU+HSF, RAM stick. No drives+ USB stuff connected from motherboard.

-------------------------
 03/10/2009 09:55 AM
User is offline View Users Profile Print this message

Author Icon
magdary
Case Modder

Posts: 1228
Joined: 09/20/2007

Are you using the onboard gpu or a dedicated gpu?

If you are using a seperate graphics card then you will need to connect the monitor cable to the onboard gpu and then go into the bios and disable the onboard gpu.

Then connect you monitor cable back up to your dedicated gpu and you should be good to go.
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information