|
 09/05/2009 03:51 PM
|
Narasimha09 Lurker
Posts: 24
Joined: 09/05/2009
|
Hi Dear,
(i am new to this forum). I just brought the New PC and installed Windows XP pro SP2.
Prosessor : AMD sempron (2.7Ghz).
Mother board : MSI MS-7309
when i click on the computer properties.it showing AMD Prosessor model Unknown
I check in BIOS setup also,it is showing the same.
I found BISO version as "Default system BIOS" in DXDIAG.
Please help me to get my motherboard to recognize AMD sempron processor correctly.
looking forward for you response.
-------------------------
Regards
Narasimha
|
|
|
|
09/05/2009 04:31 PM
|
Heffy Case Modder
Posts: 625
Joined: 03/06/2008
|
Sounds like you need a BIOS update for your motherboard to recognize this CPU. But first, you need to find out the exact model of your motherboard. MS-7309 points to five different motherboards. The model should begin with something like "K9N6...". You can use CPU-Z (download here) to determine it.
|
|
|
|
09/05/2009 06:57 PM
|
pcnazz Sub Zero
Posts: 2246
Joined: 05/17/2008
|
Hi Narasimha09 . Take Heffy's advise and go to your mother board site to update your bios . Your cpu will then be recognized no problem .
-------------------------
 Room Temp H20 | 2 Stage Cascade | PH II X6 1090T BE | PH II X2 555 / Asus CH4 v905 | i7 970 / Asus R2E v1914 | Corsair HX1000 1210W | Asus 5970 QF | Corsair Dominator GT 2000 | WD VR 3+0 Raid ( 450gb ) 
|
|
|
|
09/05/2009 09:19 PM
|
Narasimha09 Lurker
Posts: 24
Joined: 09/05/2009
|
Thank you very much.
My motherboard Model is K9N6PGM2.
-------------------------
Regards
Narasimha
|
|
|
|
09/06/2009 12:28 AM
|
PC-GURU - Lurker
Posts: 8018
Joined: 11/11/2008
 Answer
|
Originally posted by: Narasimha09
Thank you very much.
My motherboard Model is K9N6PGM2.
click here to download your bios
I show version 9.6 added support for that CPU. FYI that's the last released version.
-------------------------
AMD phenom II 1090T @ 4.23 Ghz custom water cooled Asrock 890 FX deluxe 3 mother board 4 GB DDR 3 1600 @ 1688 Mhz 7 7 7 24 T1 2688 Mhz NB 2x 1 TB WD Sata III 64 mb cache HDD,s raid 0 2x 5870 HD @ 1015/1300 Asus reference Dual OS win 7 x64 ultimate & win 7 x32 Ultimate (bench os)
Edited: 09/06/2009 at 12:35 AM by PC-GURU -
|
|
|
|
09/06/2009 12:36 PM
|
Narasimha09 Lurker
Posts: 24
Joined: 09/05/2009
|
Thanks a lot.
I have downloaded the BIOS and will install as the steps given.
-------------------------
Regards
Narasimha
|
|
|
|
09/06/2009 12:38 PM
|
PC-GURU - Lurker
Posts: 8018
Joined: 11/11/2008
|
bios updates are tricky with some boards.
So take it slow and remember you might need to reset cmos after update.
Might is the optimal word here. Not all boards have problems with bios updates.
-------------------------
AMD phenom II 1090T @ 4.23 Ghz custom water cooled
Asrock 890 FX deluxe 3 mother board
4 GB DDR 3 1600 @ 1688 Mhz 7 7 7 24 T1 2688 Mhz NB
2x 1 TB WD Sata III 64 mb cache HDD,s raid 0
2x 5870 HD @ 1015/1300 Asus reference
Dual OS win 7 x64 ultimate & win 7 x32 Ultimate (bench os)
|
|
|
|
09/08/2009 05:33 AM
|
Narasimha09 Lurker
Posts: 24
Joined: 09/05/2009
|
Updated the BIOS 9.6 Version.Now it shows AMD Sepmpron(tm) 140 processor.
thank you very much .
While BISO update i got message CMOS checksum destroyed.
and after restart i pressed f2 to load default values.
Now system is wokring fine.
can you tell me about CMOS checksum error.
-------------------------
Regards
Narasimha
|
|
|
|
09/08/2009 07:29 AM
|
Heffy Case Modder
Posts: 625
Joined: 03/06/2008
|
can you tell me about CMOS checksum error
CMOS is a memory where the BIOS stores settings. And checksum is a number that is re-computed on every reboot and compared to the previously stored one, to ensure the settings stored in memory haven't got corrupted or that there's been any changes.
I think this message is pretty normal and part of the updating process - it has zeroed your settings after or during BIOS flashing.
|
|
|
|
09/08/2009 09:40 AM
|
Narasimha09 Lurker
Posts: 24
Joined: 09/05/2009
|
Thank you
-------------------------
Regards
Narasimha
|
|
|
|
10/29/2009 12:20 AM
|
muadem Junior Member
Posts: 3
Joined: 10/29/2009
|
pls. i have problem http://c.uploadanh.com/upload/...76328001256785199.jpg
amd me is:
amd cpu phenom II x2 550
u can take me a driver cpu  thanks you
|
|
|
|
10/29/2009 12:24 AM
|
PC-GURU - Lurker
Posts: 8018
Joined: 11/11/2008
|
your bios isn't supporting the CPU & a bios update is needed.
-------------------------
AMD phenom II 1090T @ 4.23 Ghz custom water cooled Asrock 890 FX deluxe 3 mother board 4 GB DDR 3 1600 @ 1688 Mhz 7 7 7 24 T1 2688 Mhz NB 2x 1 TB WD Sata III 64 mb cache HDD,s raid 0 2x 5870 HD @ 1015/1300 Asus reference Dual OS win 7 x64 ultimate & win 7 x32 Ultimate (bench os)
|
|
|
|
10/29/2009 12:32 AM
|
muadem Junior Member
Posts: 3
Joined: 10/29/2009
|
sorry . u can take my how update bios?
my mainboard: msi ka 780g-m
my cpu: amd phenom II x2 z550
Thanks
|
|
|
|
10/29/2009 12:36 AM
|
muadem Junior Member
Posts: 3
Joined: 10/29/2009
|
|
|
|
|
10/29/2009 12:44 AM
|
PC-GURU - Lurker
Posts: 8018
Joined: 11/11/2008
|
click here to download your bios update.
they didn't make it easy, you will need a boot able floppy or flash drive made to boot like a floppy.
-------------------------
AMD phenom II 1090T @ 4.23 Ghz custom water cooled Asrock 890 FX deluxe 3 mother board 4 GB DDR 3 1600 @ 1688 Mhz 7 7 7 24 T1 2688 Mhz NB 2x 1 TB WD Sata III 64 mb cache HDD,s raid 0 2x 5870 HD @ 1015/1300 Asus reference Dual OS win 7 x64 ultimate & win 7 x32 Ultimate (bench os)
|
|
|
|
10/29/2009 12:46 AM
|
PC-GURU - Lurker
Posts: 8018
Joined: 11/11/2008
|
this might help
-------------------------
AMD phenom II 1090T @ 4.23 Ghz custom water cooled Asrock 890 FX deluxe 3 mother board 4 GB DDR 3 1600 @ 1688 Mhz 7 7 7 24 T1 2688 Mhz NB 2x 1 TB WD Sata III 64 mb cache HDD,s raid 0 2x 5870 HD @ 1015/1300 Asus reference Dual OS win 7 x64 ultimate & win 7 x32 Ultimate (bench os)
|
|
|
|
10/29/2009 12:54 AM
|
PC-GURU - Lurker
Posts: 8018
Joined: 11/11/2008
|
this will let you flash via windows
-------------------------
AMD phenom II 1090T @ 4.23 Ghz custom water cooled Asrock 890 FX deluxe 3 mother board 4 GB DDR 3 1600 @ 1688 Mhz 7 7 7 24 T1 2688 Mhz NB 2x 1 TB WD Sata III 64 mb cache HDD,s raid 0 2x 5870 HD @ 1015/1300 Asus reference Dual OS win 7 x64 ultimate & win 7 x32 Ultimate (bench os)
|
|
|
|
11/19/2009 06:28 AM
|
lira Member
Posts: 25
Joined: 11/18/2009
|
bios can update?
|
|
|
|
04/05/2010 02:24 PM
|
jaypi018 Newbie
Posts: 1
Joined: 04/05/2010
|
I also have the same problem my amd athlonx4 620 cant be recognized can you help me? this is my board model ecs a780gm-a tnx in advance =) and 1 question amd athlon x4 620 is a quadcore right? why is it gta 4 runs slow on me? my specs;
processor : amd athlon x4 620
ram : 4gb
video card : Nvidia geforce 9500gt
is the processor the problem?
sorry for bad english =(
|
|
|
Search Topic
