AMD Processors
Decrease font size
Increase font size
Topic Title: AMD Sempron Overclocked
Topic Summary:
Created On: 03/18/2005 10:05 AM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 03/18/2005 10:05 AM
User is offline View Users Profile Print this message

Author Icon
Dea-tor
Junior Member

Posts: 3
Joined: 03/16/2005

Hi all

Please can someone give me advice on overclocking a sempron 3000+,

i used a program called speedfan(4.22) and altered the clock speed from 166 to

190 this says it has inceased the clock speed from 2000mhz to 2272mhz and i

used cpuz to confirm this

Package Socket A
Technology 0.13µ
Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
Clock Speed 2287.0 MHz
Clock multiplier x12.0
Front Side Bus Frequency 190.6 MHz
Bus Speed 381.2 MHz
Stock frequency 2000 MHz
P-Rating 3000+
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 512 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 2287.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits


Chipset
------------------------------------------------------------------------------

Northbridge nVidia nForce2 IGP rev. A2
Southbridge nVidia nForce2 MCP rev. A4
Graphic Interface AGP
AGP Revision 3.0
AGP Transfert Rate 8x
AGP SBA supported, not enabled
AGP Aperture 128 MBytes
Memory Type DDR
Memory Size 512 MBytes
Memory Frequency 190.6 MHz (1:1)
CAS# 2.5
RAS# to CAS# 3
RAS# Precharge 3
Cycle Time (tRAS) 7


Memory SPD
------------------------------------------------------------------------------

DIMM #1

General
Memory type DDR-SDRAM
Manufacturer (ID) Samsung (CE00000000000000)
Size 512 MBytes
Max bandwidth PC2700 (166 MHz)
Part number M3 68L6423ETN-CB3
Serial number F1049D67
Manufacturing date Week 53/Year 03

Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no


The motherboard has increased temperature to 55-60 degrees but the cpu has

remained constant at 45 degrees, is this succesfull or am i going to have

problems?

Thanx in advance Dea-tor (newbie)

-------------------------
Asus A7N8X-VM
AMD Sempron™ 3000+
Clock Speed 2287.0 MHz
Clock multiplier x12.0
Front Side Bus Frequency 190.6 MHz
Bus Speed 381.2 MHz
512 MBytes DDR-SDRAM PC2700 (166 MHz)
 03/19/2005 07:28 AM
User is offline View Users Profile Print this message

Author Icon
AMD808
Moderator

Posts: 3771
Joined: 10/09/2004

I believe your temps are either the otherway around, or a misreading.

55-60C motherboard temp is just too high. Actually, even 45C is pushing it... Your 3000+ is not the best overclocker because of the already high multiplier. I advise you to not push it any further than it is already...

-------------------------
MODERATOR

The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information