AMD Processors
Decrease font size
Increase font size
Topic Title: Cannot Boot
Topic Summary:
Created On: 01/24/2005 11:31 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 01/24/2005 11:31 PM
User is offline View Users Profile Print this message

Author Icon
robwayn
Junior Member

Posts: 1
Joined: 01/24/2005

I recently purchased some lowcost supplies to put together a system.I am using a Sempron 2400 processor with a M7VIZ motherboard. Everything looks ok. My system powers on but screen remains blank.
Using:
350W PSU

I could really use some help

ROBBIE
 01/25/2005 11:44 AM
User is offline View Users Profile Print this message

Author Icon
grim213ca
Junior Member

Posts: 8
Joined: 01/12/2005

If you are not getting anything when you turn your system off.... try removing your ram, and then turning it on. This will force a POST error, basically a lot of beeps. If you get the beeps, then your motheboard should be good. If not, make sure your speaker lead is pluged in properly on to the motherboard.

If you board is beeping, replace your ram, and then try re-seating your video card. (take it out, put back in) If still nothing, replace the video card with a known working one.....IF still not working, replace monitor and repeat...

hope this helps...


grim213ca
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information