AMD Processors
Decrease font size
Increase font size
Topic Title: overclocking a sempron 3100+ with k8vm800m
Topic Summary:
Created On: 01/25/2005 06:41 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 01/25/2005 06:41 PM
User is offline View Users Profile Print this message

Author Icon
Ic3D3mon
Junior Member

Posts: 1
Joined: 01/24/2005

I just purchased a new board and cpu .I am really green as far as o/c ic concerned .I tryied to o/c my fsb to 259 which work but when I check it with cpu-z the reading are the same.Any help would be appreciated.


cpu-3100+ semprom
gigabyte k8vm800m
ddr ram ddr400 Kingston 512 mb (one stick)

my bios has the newest version

Thnak you for your time
 01/27/2005 10:09 PM
User is offline View Users Profile Print this message

Author Icon
hubs8907
Senior Member

Posts: 1647
Joined: 06/10/2004

Did you make sure to save the setting in your bios?

Yeah, typically you can just use the FSB to o/c, but there are other options like the multiplier and voltage. But use the FSB, it is the safest and you really cant damage your system if you use just that. I would advise against the voltage, because it will damage your processor over time.

hubs8907
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information