AMD Processors
Decrease font size
Increase font size
Topic Title: Sempron2800+ & nForce2 Ultra 400
Topic Summary:
Created On: 01/29/2005 06:41 AM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 01/29/2005 06:41 AM
User is offline View Users Profile Print this message

Author Icon
Junior Member

Posts: 1
Joined: 01/29/2005

I have problem with my sempron:
The Frequency is incorrect, but i can't change it!
If I let it in the automatic selection, the cpu is "underclocked" (1,60 GHz) If i tried then to push it up, to 2.00GHz the Computer doesn't start!
Which FSB & Multiplier must i select?

Please Help me!

Technical information:
AMD Sempron 2800+
nForce2 Ultra 400 Chipset
AOpen AK79D-400VN Mainboard
512MB DDR 333 RAM
 01/29/2005 06:48 AM
User is offline View Users Profile Print this message

Author Icon

Posts: 3771
Joined: 10/09/2004

Does your board have jumpers? Refer to your manual for this - the website was really slow, and did not allow me to download the manual.

The FSB in the BIOS should be 166 MHz. The multiplier should be hard locked at 12x.


The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2015 FuseTalk Inc. All rights reserved.

Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information