does any one know how to do it to a semp 3400+ 754 socket?
my board wont let me up the voltage past 1.48 which is stopping my overclock

-------------------------
semp 3400+ @2.52ghz, akasa evo33 with silver paste, asrock k8nf4g, 2 x 512mb ddr420(2.5-3-3-7), 7600gt core 625mhz mem 840mhz, X-fi extreme gamer, nec ad-5170a + lg gdr8164b, 2 x samsung spinpoint 250gb, 600w psu, phong 2 case, cpu temp(idle - burn) 26c - 32c(fans full speed)31c - 38c(low fan speed) superpi 1m - 38.344 sec(AF4OB221). cpuz 3Dmark03 13104

Try this http://www.ocinside.de/html/wo...754p...754_pinmod.html

nice one

i had found the same page aswel since

not had the balls to do it yet. i dont want to fry it till after xmas.

my bios says core voltage is 1.45 but cpuz says upto 1.48

-------------------------
semp 3400+ @2.52ghz, akasa evo33 with silver paste, asrock k8nf4g, 2 x 512mb ddr420(2.5-3-3-7), 7600gt core 625mhz mem 840mhz, X-fi extreme gamer, nec ad-5170a + lg gdr8164b, 2 x samsung spinpoint 250gb, 600w psu, phong 2 case, cpu temp(idle - burn) 26c - 32c(fans full speed)31c - 38c(low fan speed) superpi 1m - 38.344 sec(AF4OB221). cpuz 3Dmark03 13104

I used the wire mod on a socket a processor before to get it to run at 1.1v at 1.2Ghz so i could build a silent computer and it worked great, there's so many pins now it makes it a lot more difficult.