All you on this forum who help idiots like me, you flippin' rock!
I have a 2800+ (2.0) that says it's a 1900+ (1.6) my FSB is set at 133 when I try to set it to higher, say 166, my system freezes and I have to reset my CMOS. Here are my specs, what's wrong?
If that doesn't work, here it is again.
CPU(s)
Number of CPUs 1
Name AMD Athlon MP
Code Name Thoroughbred
Specification AMD Athlon XP 1900+
Family / Model / Stepping 6 8 1
Extended Family / Model 7 8
Package Socket A
Core Stepping B0
Technology 0.13 um
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
CPU Clock Speed 1596.0 MHz
Clock multiplier x 12.0
Front Side Bus Frequency 133.0 MHz
Bus Speed 266.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 256 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1596.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits
Mainboard and chipset
Motherboard manufacturer
Motherboard model KT880-8237,
BIOS vendor Phoenix Technologies, LTD
BIOS revision 6.00 PG
BIOS release date 02/07/2006
Chipset VIA KT880 rev. 00
Southbridge VIA VT8237 rev. 00
Sensor chip Winbond FF
FSB Select 400 MHz
Graphic Interface AGP
AGP Status enabled, rev. 2.0
AGP Data Transfer Rate 1x
AGP Max Rate 4x
AGP Side Band Addressing supported, enabled
Memory
DRAM Type DDR-SDRAM
DRAM Size 512 MBytes
DRAM Frequency 221.7 MHz
FSB

RAM 3:5
DRAM Interleave 4-way
CAS# Latency 3.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 8 clocks
Command Rate 2T
# of memory modules 1
Module 0 Kingston DDR PC3200 - 512 MBytes
Software
Windows version Microsoft Windows XP Professional Service Pack 2 (Build 2600)
DirectX version 9.0c