srry for bringing this topic up again where r dual core drivers for win xp cuz i only see 1 core and how do i permanetly set the affinity

-------------------------
I7-975 at 4.2ghz//noctua ND-H14//Gigabye X58-UD5// Gskill 6gb ddr3 at 2ghz// intel x25 80gb// 1 1TB seagate hdd// antec tpq 1200 watt psu// CM stacker 832 case/ ECS GTX 460 1GB black edition



Opteron 165 at 2.2ghz 1.4Vcore//Asus formula HD4770//2gb OCZ platinum 2-3-2-5//Asus A8VE-SE//Seagate 2x 250gb SATA2 RAID0// thermalrock dragon gaming case 5 90mm fans// XP pro SP2//

k i found the drivers o yea heres my new system

Asus A8V-E SE bios latest
Opterton 165 oc to 2.0ghz
BFG 7800 GT OC (stock)
ThermalRock Dragon gaming tower black (heavy [content edited] case)
OCZ 2gb dual channel platinum edition at 223mhz (446mhz ) 2-3-2-5 timings 1T
Enermax 535 watt FMA P.S.U


using my stock 4 heatpipe opteron cooler temps :

1.8ghz:
idle: 32-34 degrees celcius
load: 42-45 degrees full load

2.0ghz:
idle:34-37 degrees celcius
load: 43-46 degrees load

-------------------------
I7-975 at 4.2ghz//noctua ND-H14//Gigabye X58-UD5// Gskill 6gb ddr3 at 2ghz// intel x25 80gb// 1 1TB seagate hdd// antec tpq 1200 watt psu// CM stacker 832 case/ ECS GTX 460 1GB black edition



Opteron 165 at 2.2ghz 1.4Vcore//Asus formula HD4770//2gb OCZ platinum 2-3-2-5//Asus A8VE-SE//Seagate 2x 250gb SATA2 RAID0// thermalrock dragon gaming case 5 90mm fans// XP pro SP2//

I don't think it can be permanently set.

how do run 2 x prime 95 on ym cpu core and my cpu voltage is 1.4-1.45 is that good or bad?


-------------------------
I7-975 at 4.2ghz//noctua ND-H14//Gigabye X58-UD5// Gskill 6gb ddr3 at 2ghz// intel x25 80gb// 1 1TB seagate hdd// antec tpq 1200 watt psu// CM stacker 832 case/ ECS GTX 460 1GB black edition



Opteron 165 at 2.2ghz 1.4Vcore//Asus formula HD4770//2gb OCZ platinum 2-3-2-5//Asus A8VE-SE//Seagate 2x 250gb SATA2 RAID0// thermalrock dragon gaming case 5 90mm fans// XP pro SP2//