I have built a system using the TYAN S2462UNG mobo with 2 AMD MP2000+ processors.

When running under near 95% CPU usage (both processors) the TYAN System Monitor program shows a CPU Temperature of 66 decrees for CPU 1 and 59 for CPU 2.

I have been unable to find the acceptable temperature range for the processors.

Can someone please advise?

Thanks..
SP

-------------------------
Tyan 2462UNG, Dual MP 2000+,Antec PP510D Power Supply, 1GB RAM, MX-440 Dual Head Video with Two NEC 1530V LCD Monitors, Plextor Plexwriter CD R/W, Sony DRU-510 DVD R/W

Anything above 60 is pushing it.
My air-cooled rigs run 46 idle 52 full load.
Sounds like either your HSF are undersized/not working, or poor case ventalation.

-------------------------
DFI LP UT NF4 Ultra-D I BIOS 704-2BTA
Athlon 64 X2 3800 LCBKE 0643 @ 3000 MHz
TR Ultra 120 Extreme I 2 X 1 Gig G.Skill DDR500
PC Power and Cooling 510-XE I EVGA 7800GT

Max temp for your CPU's is 90-95°C, depending on model.
As long as your system is fully stable, there is no need to worry.

-------------------------
The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.

---

<center><font color=red>MODERATOR</center></font>

---

AMD Athlon 64 X2 6000+ 89W :: Asus M2N32SLI Deluxe :: 2x1024MB Muskin XP2-6400 DDR2-800 :: BeQuiet! Darkpower Pro 530W :: 2x WD Raptor 74GB/10k rpm, RAID 0 :: ATI Radeon X1950XTX

for my case, athlon 1.2G, when cpu temperature reach 48C ,system temp reach 42C is start to hang.