AMD Processors
Decrease font size
Increase font size
Topic Title: A7M266-D CMOS reset and speed
Topic Summary:
Created On: 02/02/2005 07:08 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 02/02/2005 07:08 PM
User is offline View Users Profile Print this message

Author Icon
DarkGreen16
Junior Member

Posts: 1
Joined: 02/02/2005

I have an A7M266-D and have 2 questions...

First of all is there a jumper to reset the CMOS?

It would seem not so how am i supposed to reset the CMOS with this board.

Also when I have the thing up and running it shows both processors in the POST
then I get into windows and it shows 2 processors under system devices

BUT when I look under the General tab in system it shows the computer is a 1.2ghz
is that right?

BTW I have 2 1.2'ss in the board.

Shouldn't it be saying 2.4 ghz?

If it is supposed to say 2.4 any trouble shooting ideas?

I am running windows XP Prof.

TIA
 02/06/2005 08:26 PM
User is offline View Users Profile Print this message

Author Icon
Seeker
Member

Posts: 87
Joined: 01/24/2005

dual 1.2's don't run at 2.4, it just runs at 1.2, but alot more stable than 1 processor (also faster). I Don't know about that motherboard, did you get a manual with it?
 02/15/2005 03:10 PM
User is offline View Users Profile Print this message

Author Icon
sintri
Junior Member

Posts: 13
Joined: 12/29/2004

dual proccesors aren't really meant to give you more speed, they just allow higher thresholds, having 2 1.2ghz proccessors means you'll be able to process two programs running at 1.2ghz at the same time, speeds don't add up linearly unfortunately. if you want speed, save some money and go 64 bit, well that's not quite saving that much money. But the 1.2ghz reading is correct. unless you bought processors faster than that, then you might want to check something out.
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information