AMD Processors
Decrease font size
Increase font size
Topic Title: trouble with Tyan s2462 MB 12volt rises to 14.3 volts
Topic Summary:
Created On: 07/18/2006 11:17 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 07/18/2006 11:17 PM
User is offline View Users Profile Print this message

Author Icon
Junior Member

Posts: 1
Joined: 07/18/2006

I have been having trouble with my dual mp system using the Tyan s2462 MB.
The system won't restart after it gets warm. I have to unplug the system for 5 minutes to boot again. I have had the cpu in the shop and he replaced the MB and then a new PS. It worked ok for 48hrs then started to give the same behavior.

It crashes... blue screen... after a day or two if left on.

System worked fine for the first two years.

I noticed the 12 volt system reporting starts at 6 volts and goes up to 14.3-14.5 voltsover 15 mins after starting.
It will restart normally until it reaches about 13 volts.

Any suggestions? Another bad board?


112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2015 FuseTalk Inc. All rights reserved.

Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information