i need help guys my pc keep Rebooting for some reason but must be ram or MB not sure what to do ?













GIGABYTE GA-MA785GM
AMD Phenom II X3 720
F2-8500CL5D-4GBPK

Edited: 09/20/2009 at 10:04 PM by AMD Processors Moderator

Hi 600rr4life . Not much info here you left us but try clearing your CMOS and reboot and enter you bios and set up your hard drives and correct boot sequence and anything else you need and this I think will correct the problem if you have no hardware problems .

-------------------------

Room Temp H20 | 2 Stage Cascade | PH II X6 1090T BE | PH II X2 555 / Asus CH4 v905 | i7 970 / Asus R2E v1914 | Corsair HX1000 1210W | Asus 5970 QF | Corsair Dominator GT 2000 | WD VR 3+0 Raid ( 450gb )

If your memory voltage is set to auto you will need to change it to manual and set it to spec. The G.Skills you are running will need to have 2.0v to 2.1v to run properly.

-------------------------
Antec 1650B
PC Power & Cooling Silencer 910w
ASUS M3A79-T DeLuxe
1090T x6 @Boiling in the La-Boratory
Corsair H70
OCZ Reaper 8500 2x2 *Pending
ASUS 5970 (under OC investigation)
EVGA 260 55nm (holding pattern)
SeaGate 320x2 16GB Sata
Creative X-Fi Elite Pro
Logitech Z-5500
XP Pro SP2

And goto advanced system settings/advanced/startup and recovery and change the system failure options to NOT automatically restart. This should give a BsOD which will help in the diagnosis.

-------------------------
Spider: Phenom II 955, Antec Kuhler 920, GA-MA790FX-DS5 (F8g), ASUS 5870/V2, ASUS Xonar D2X pcie,
OCZ2N1066SR2GK (4x1gig @800), Antec Truepower New 750, Fractal Design's Arc Midi Case.
#2: A64 X2 4200+, ASUS A8V-D, SAPPHIRE AGP 1950PRO

i had memory at 1066 so i had to put it back to 800 going do what you said 2.0v to 2.1 v see if work.