sry 4 double post, was afraid that if i just edit my last poste, some1 wouldnt notice
so i got it to run, set the fsb etc by jumper settings, but something is pretty [content edited] odd, if i have the jumpers set to something, but i didnht set the jen jumpers, which means it shouldnt use the jumper settings, it still influences the clocking.,...
anyways, ive tried everything i could think off, i got the cpu only to 1.3 ghz ? what am i doing wrong?
ive put the core voltage up to 1.75/1.80 and also 1.80/1.85 then i set the multiplier to 12.5 and the fsb to 133 by jumper settings, but the fsb only ran with about 90mhz (is that even possible?!
so that means with that settings i got up to about 900 mhz what is pretty odd isnt it?
the i set the jumpers 4 the fsb to jumperfree mode and the multiplier to 9.0 the core voltage is at 1.75 and the cpu runs now at 1.3 ghz !! i mean wtf i dont get ?
can some1 plz give me some hints how i could get that [content edited] running a lil faster
(~1.4 ghz-1.5 ghz would be fine )
EDIT: i think ive solved the problem, my sdram is now running at 150 mhz the FSB is at 113 mhz and the multiplier is at 12.... are these settings allright? does it somehow influenz the speed in a negative way ( FSB is ONLY at 123 instead of 133 )