dread_pirate_steele,
You would be wise to just do a 'copy' of your above post, and 'paste' it into your previous thread.
That way, if there is any question about what hardware all these drives are supposed to be working on, the answer is at least in that thread (if you haven't already put that info into your 'sig', as I requested in your other thread).
How do you have all these drives jumpered?
The one sharing the cable with the hard drive should be jumpered as a 'Slave'.
Of the two on the other cable, one should be 'Master', and the other 'Slave'
-------------------------
Here is my new PCChips M848A' ">http://img.photobucket.com/alb...2_T-2-3-3-6-2_M848.jpg v2.1, with a 1700+ @ 2411 MHz, and my trusty old PCChips M810L' ">http://members.lycos.co.uk/mmm...00MHz_Sandra_tests.jpg v7.1A, with a Barton 2500+ @ over 3500+. Some of my fancy cars are on this pag