 11/11/2005 05:03 PM
|
candle_86 Case Modder
Posts: 1502
Joined: 02/20/2005
|
I dont go over 1.75
-------------------------
Core I7-3930k -- MSI GTX670 Quad SLI -- ASUS Rampage Extreme IV -- 4x4gb Muskin Redline DDR3 1866 -- 128gb SSD -- Windows 7 Ultimate
Phenom II 960T -- XFX HD4870 -- ECS IC780M -- 2x2gb DDR3 1333 -- 500gb HD -- Windows 7 Home Premium
|
|
|
|
11/12/2005 07:52 AM
|
cowen1000 Senior Member
Posts: 857
Joined: 06/15/2004
|
I've moved on again from a (socket A) to a (socket 754) Asus K8V SE Deluxe Sempron 64 2800+ @ 2Ghz 1 Gb PC3200 Ram Maxtor 80 GB HDD Seagate 40 GB HDD Abit Ati radean 9600 XT (Guru) Samsung TS-H 552 Writemaster Q Tec 550W Dual fan PSU Can't overclock anymore because my mobo hasn't got any working PCI/AGP locks and hasn't any PCI/AGP divisors. Therfore when I increase my HT Freq my PCI/AGP bus is way out of spec. My HT Freq is at 250 x 8 (2000) which is a 400 overclock but my AGP Freq is 83 and my PCI Freq is 41 which is way to much but my computer is stable (Prime 95, Toast, Heavy load) 20 hours. I wish I could do somethin about the PCI/AGP Freq's as I know my cpu will overclock to around 2400 Mhz. I think i'll have to get a different mobo (NForce chipset)
-------------------------
http://www.danasoft.com/sig/hankthomas.jpg
|
|
|
|
11/12/2005 09:11 AM
|
candle_86 Case Modder
Posts: 1502
Joined: 02/20/2005
|
Sense ya upgraded, wanna sell your old SKT A mobo?
-------------------------
Core I7-3930k -- MSI GTX670 Quad SLI -- ASUS Rampage Extreme IV -- 4x4gb Muskin Redline DDR3 1866 -- 128gb SSD -- Windows 7 Ultimate
Phenom II 960T -- XFX HD4870 -- ECS IC780M -- 2x2gb DDR3 1333 -- 500gb HD -- Windows 7 Home Premium
|
|
|
|
11/12/2005 09:50 AM
|
cowen1000 Senior Member
Posts: 857
Joined: 06/15/2004
|
I've give my skt A to one of my kids.
-------------------------
http://www.danasoft.com/sig/hankthomas.jpg
|
|
|
|
11/12/2005 01:53 PM
|
Charlie22911 Voodoo Programmer
Posts: 3278
Joined: 04/09/2004
|
keep in mind that as long as you can keep your CPU cool enough it cant get hot enough to burn, but then you do have to worry about mosfetts going out...
im going to go 939 with an X2 some time soon.
cowen, i recomend the lanparty NF3 board, it may be costly but people are managing overclocks past 3Ghz on that board...
-------------------------
Desktop:
Phenom II x6 1055T @ 4GHz | 4x2GB Patriot DDR3 1600 @ 2000 | 3x AMD Radeon HD6970 Crossfire
Laptop:
Core i7 2960xm @ 4.2Ghz | 4x4GB Kingston DDR3 1866 | 2x GTX 580m SLI OC 725/1450/1500
|
|
|
|
11/15/2005 10:57 AM
|
cowen1000 Senior Member
Posts: 857
Joined: 06/15/2004
|
@Charlie Take a look at this' ">http://www.ebuyer.com/customer...duct_uid=86394&_LOC=UK for me. Is this the mobo you recommend? Does this mobo have AGP/PCI locks/divisors? As i'm finding it hard to find a (skt 754) mobo that has /mad.gif' border='0' style='vertical-align:middle' alt='mad.gif' /> I'm thinking of building an A64 (939) system after xmas but for now i'm going to max out this one, so I need to get a more solid mobo. Speak to you soon old friend /wink.gif' border='0' style='vertical-align:middle' alt='wink.gif' />
-------------------------
http://www.danasoft.com/sig/hankthomas.jpg
|
|
|
|
11/15/2005 11:14 AM
|
cowen1000 Senior Member
Posts: 857
Joined: 06/15/2004
|
@Charlie Thanks for the advice on the mobo. I found this' ">http://www.ocworkbench.com/200...LP-UT-nF3-250Gb/g1.htm review on it and it has everything that I need. I'm going to get one. I'll keep you posted on the performance. Cheers. /wink.gif' border='0' style='vertical-align:middle' alt='wink.gif' />
-------------------------
http://www.danasoft.com/sig/hankthomas.jpg
|
|
|
|
11/15/2005 02:08 PM
|
Charlie22911 Voodoo Programmer
Posts: 3278
Joined: 04/09/2004
|
that board is proven to be one of the best 754 boards on the planet.
a very good place to converse with others with the same intrests as you would be www.dfi-street.com. its where im active now since they have helped me get those above clocks. keep us posted and hope to see you there /wink.gif' border='0' style='vertical-align:middle' alt='wink.gif' />.
-------------------------
Desktop:
Phenom II x6 1055T @ 4GHz | 4x2GB Patriot DDR3 1600 @ 2000 | 3x AMD Radeon HD6970 Crossfire
Laptop:
Core i7 2960xm @ 4.2Ghz | 4x4GB Kingston DDR3 1866 | 2x GTX 580m SLI OC 725/1450/1500
|
|
|
|
11/17/2005 12:36 PM
|
candle_86 Case Modder
Posts: 1502
Joined: 02/20/2005
|
I still say go with Chaintech, never had any problems with them. The only other board that never messes up on me is ECS but they cant over clock woth notin.
-------------------------
Core I7-3930k -- MSI GTX670 Quad SLI -- ASUS Rampage Extreme IV -- 4x4gb Muskin Redline DDR3 1866 -- 128gb SSD -- Windows 7 Ultimate
Phenom II 960T -- XFX HD4870 -- ECS IC780M -- 2x2gb DDR3 1333 -- 500gb HD -- Windows 7 Home Premium
|
|
|
|
11/17/2005 02:52 PM
|
eddaweaver Senior Member
Posts: 1390
Joined: 03/10/2004
|
Candle: DFI is one of the best motherboard brands there is.
|
|
|
|
11/18/2005 02:00 AM
|
candle_86 Case Modder
Posts: 1502
Joined: 02/20/2005
|
Maybe, but I had an old Skt A one once, died after 2 months, bought a Chaintech 7NJL3 and never had a problem.
-------------------------
Core I7-3930k -- MSI GTX670 Quad SLI -- ASUS Rampage Extreme IV -- 4x4gb Muskin Redline DDR3 1866 -- 128gb SSD -- Windows 7 Ultimate
Phenom II 960T -- XFX HD4870 -- ECS IC780M -- 2x2gb DDR3 1333 -- 500gb HD -- Windows 7 Home Premium
|
|
|
|
11/18/2005 01:56 PM
|
Charlie22911 Voodoo Programmer
Posts: 3278
Joined: 04/09/2004
|
well, those above screenies was on a $30 DFI board... the DFI lanpartys have made as high as 3.2Ghz\270Mhz FSB in the extreme cases.
acording to sandra im beating a FX-51 like a little kid and matching a FX-55, a FX-55 slightly out preforms mine in arithmatic benchmarks though. to be a $30 board i think that says alot for DFI, dont you? also keep in mind that the world record 3Dmark05 uses a lanparty!
-------------------------
Desktop:
Phenom II x6 1055T @ 4GHz | 4x2GB Patriot DDR3 1600 @ 2000 | 3x AMD Radeon HD6970 Crossfire
Laptop:
Core i7 2960xm @ 4.2Ghz | 4x4GB Kingston DDR3 1866 | 2x GTX 580m SLI OC 725/1450/1500
|
|
|
|
11/18/2005 06:45 PM
|
cowen1000 Senior Member
Posts: 857
Joined: 06/15/2004
|
|
|
|
|
11/28/2005 05:14 PM
|
cowen1000 Senior Member
Posts: 857
Joined: 06/15/2004
|
I know this a totally irrelevent question but does anybody know what happened to Milt?
-------------------------
http://www.danasoft.com/sig/hankthomas.jpg
|
|
|
|
11/28/2005 06:40 PM
|
Charlie22911 Voodoo Programmer
Posts: 3278
Joined: 04/09/2004
|
he now posts here in the athlon section: http://www.stud.fernuni-hagen....142-...d/ikonboard.cgi' ">http://www.stud.fernuni-hagen....bin/ibrd/ikonboard.cgi
-------------------------
Desktop:
Phenom II x6 1055T @ 4GHz | 4x2GB Patriot DDR3 1600 @ 2000 | 3x AMD Radeon HD6970 Crossfire
Laptop:
Core i7 2960xm @ 4.2Ghz | 4x4GB Kingston DDR3 1866 | 2x GTX 580m SLI OC 725/1450/1500
|
|
|
|
11/29/2005 05:50 AM
|
cowen1000 Senior Member
Posts: 857
Joined: 06/15/2004
|
Cheers Charlie, once again you have the answers /cool.gif' border='0' style='vertical-align:middle' alt='cool.gif' />
-------------------------
http://www.danasoft.com/sig/hankthomas.jpg
|
|
|
|
11/29/2005 08:21 AM
|
Charlie22911 Voodoo Programmer
Posts: 3278
Joined: 04/09/2004
|
lol, no problem /wink.gif' border='0' style='vertical-align:middle' alt='wink.gif' />.
-------------------------
Desktop:
Phenom II x6 1055T @ 4GHz | 4x2GB Patriot DDR3 1600 @ 2000 | 3x AMD Radeon HD6970 Crossfire
Laptop:
Core i7 2960xm @ 4.2Ghz | 4x4GB Kingston DDR3 1866 | 2x GTX 580m SLI OC 725/1450/1500
|
|
|
|
10/23/2006 12:23 PM
|
PrinceGame Junior Member
Posts: 3
Joined: 10/22/2006
|
I used two days to read this,and got many useful thing. Thanks a lot. 
|
|
|
|
10/24/2006 04:47 AM
|
action man Moderator
Posts: 3572
Joined: 10/12/2003
|
quote:
Originally posted by: 游戏王子
I used two days to read this,and got many useful thing.
Thanks a lot.
thats good to hear  welcome to the forums
-------------------------
MODERATORThe opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates. Do you wish me a good morning, or mean that it is a good morning whether I want it or not; or that you feel good this morning; or that it is a morning to be good on?
|
|
|
|
10/26/2006 04:30 PM
|
Charlie22911 Voodoo Programmer
Posts: 3278
Joined: 04/09/2004
|
wow, just got a reply notification, those were the good ole days...
i may be getting another K6 machine soon, thisone with an asus P5A i do believe.
welcome to the forums man, lots of good info here!
-------------------------
Desktop:
Phenom II x6 1055T @ 4GHz | 4x2GB Patriot DDR3 1600 @ 2000 | 3x AMD Radeon HD6970 Crossfire
Laptop:
Core i7 2960xm @ 4.2Ghz | 4x4GB Kingston DDR3 1866 | 2x GTX 580m SLI OC 725/1450/1500
|
|
|
Search Topic
