AMD Processors
Decrease font size
Increase font size
Topic Title: Boot Problem
Topic Summary:
Created On: 12/13/2004 08:22 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 12/13/2004 08:22 PM
User is offline View Users Profile Print this message

Author Icon
depawl
Junior Member

Posts: 1
Joined: 12/13/2004

K6-2/550 on an FIC VA-503+ MB.
I built this system for a client a couple years ago. He brought it back to my shop stating it was completely dead.
Whe turning on this computer, the PS runs, the hard drive runs, the front panel lights and the CD light comes on, and that's it, no beeps, nothing at all comes up on the monitor. Upon opening the case I determined that the CPU heat sink fan had failed.
I completely stripped the system down to the MB and CPU, removed the MB from the case (in the event it was shorting out on the case) and tried it again, but still get nothing. So I'm assuming it's the CPU, since the fan had failed, although it doesn't show any signs of overheating.
My question is this: Is there any way to determine whether it's the CPU or the MB (or both)? I don't happen to have a functioning CPU to test with, so I'm wondering if there's any other way to tell?
Thanks for any input.
 12/14/2004 08:14 AM
User is offline View Users Profile Print this message

Author Icon
PSJ
Member

Posts: 40
Joined: 11/23/2004

Clear the cmos, double check the jumpers and check the PSU unit as well as any attached input devices.

K6-2 are pretty cheap if you need a replacement.

The only way I know to test a CPU is to try it in a system that's known to work.
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information