AMD Processors
Decrease font size
Increase font size
Topic Title: Duron 800 & A dead MB
Topic Summary:
Created On: 11/16/2003 08:03 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 11/16/2003 08:03 PM
User is offline View Users Profile Print this message

Author Icon
ukcatsfo
Junior Member

Posts: 1
Joined: 11/16/2003

Hoping someone here may have some advice....

Building low-cost machine for friend and using AMD Duron 800 and Biostar M7MIA combo. At first, machine would only start fans, but nothing else. POST diag card showed error code of 0A "Setup interrupt vector table", which I never heard of before.

Looked closer and found CPU clock jumpers were left on 133mHz, changed to 100mHz setting per AMD specs.

Went to clear CMOS and found CMOS jumpers were left on Clear CMOS setting. Put jumpers back to Normal Operation position and now MB will not power on whatsoever!!!

HELP!!!!!!!!!!!!!
Statistics
112018 users are registered to the AMD Processors forum.
There are currently 0 users logged in.

FuseTalk Hosting Executive Plan v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.



Contact AMD Terms and Conditions ©2007 Advanced Micro Devices, Inc. Privacy Trademark information