I have a Compaq Presario 1235 laptop with a stock 266mhz K6-2. I bought an AMD K6-2+ 450 ACZ processor to use as an upgrade. After I installed it and set the dipswitches, I powered it up and it won't boot past the Compaq screen. If I press the ESC key it shows CPU=AMD-K5 00000640K System RAM Passed 0097280K Extended RAM Passed Press F10 to enter setup. If I press F10 it says Entering setup... and nothing else happens. Here's the websiteI went to to get the switch settings http://img108.imageshack.us/my.php?image=12507ko.jpg
' ">http://img108.imageshack.us/my.php?image=12507ko.jpg I used the Upgrade configuration #2, it seemed to fit all my specs.2.0v core, 3.3v I/O, 2x multiplier, 66 mhz bus, and other cpu type.I believe I set the switches
correctly, I set them from left to right #1-#10 for S1 followed by #1 and
#2 on S2.Down being Off or "0", up being On or "1".I've checked a few
times to make sure the processor is seated properly. Any help would be appreciated.