hello
i have the gigabyte ma790xt-ud4p motherboard (chipset amd 790x and SB 750)
I want install windows 7-64 bit in the new ssd crucial m4.
But i would not know the exact procedure for the driver amd.

1 it must use the pre-install driver ahci? (F6 in the install?)

2 when the SO is install, which driver go installed?
only the first and the third party in this page?
http://support.amd.com/us/gpud...ges/raid_windows.aspx

(i don't have the raid)

thanks
Jody

This link should help you out quite a bit ---> http://www.overclock.net/t/115...mization-for-ssds-hdds

-------------------------
The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.

yes ok..but I wanted to know like proceeding with the driver amd, and which are the driver advised
hello
:-)

Interesting thread that Canis. Will have to try that next time I install now I have UEFI.

Jody, the only driver you need to worry about during install is a raid driver afaik. If you don't have raid just go ahead and install and Windows should take care of everything for you. Just remember to set AHCI in the bios before doing so.

-------------------------
The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.

1100t on M5A99x-EVO with 2x4gb and 6870 running Win7 on Force120 ssd in Corsair 600t cooled by H100. Folding for team 34106

Correct, just follow the steps defined in that thread Jody and you will be ok.

Yes sir!! very nice thread!!

-------------------------
The opinions expressed above do not represent those of Advanced Micro Devices or any of their affiliates.

thanks
i'm not have the raid, but only one ssd for the SO
yes, before i'm setting in the bios ahci mode for the sata port's

i'm not convinced for the driver..ok windows 7 install driver generic microsoft...but it is not better if i install the SB driver amd and the ahci driver amd...??
(when the SO is installed)

hello :-)