ASUS Crosshair IV Formula - AMD 890FX - Socket AM3 - PCI-E 2.0 - DDR3 1600/1800/1866 - SATA 6Gb/s RAID - SupremeFX X-Fi Audio - CrossFire - ATX
coolit eco roughly getting around 3.2c temp
ive tried to oc in the bios ive set the multiplyer tp 14 and the ratio ive clocked up to
286 think that makes the cpu 4ghz the ram percentage goes upto 1444 roughly ive set the cpu temp 1.45 and the ram to 1.75 but everytime i go to reset the system it doesnt boot backup takes about a min then says overclock failed ive tried using the turbov in windows using the same volts and cpu speed but it freezes
thought i was going to get a good overclock with this board and cpu but looks like either i cant get the right sequence or there is a hardware incompatobilty
Too much at once. Sounds like you had a meory overclock isuue. First rise the CPU multiplier untill its stable, Then get the NB at 2600 stable, need to change its multi, leave the HT it doesnt do anything useful. Once you have that woking adjust the fsb 2 meg at a time. But you sholudnt need it. Read a lot before starting it makes things easier and safer when you know what you are doing.
-------------------------
Gigabyte Ga8800 ga UD3 AMD 1090t @ 4.14 GHz(1.45V) NB @ 2800 Nvidia 560ti gtx 1Gig 8 Gig Corsair 1600 Mhz DDR3 Win 7 64 bit Ultimate
Hello ... I want to ask ... if amd liano 3850 A8 can Hybride Crossfire with ati radeon HD6670 vga DDR 5?
Or just be at Hybride Crossfire with ati radeon HD6670 vga DDR 3?
Thanks for the info :-)
Sorry if wrong ...
i am pretty sure you cannot run hybrid crossfire with those two chips, it would have to be a 3xxx series for that or no crossfire at all. but to be honest you wont need it with the 6670
.Aaron
-------------------------
Experience is a wonderful thing, it enables you recognise a mistake when you make it again
Search Topic
01/27/2011 07:11 AM
