http://forums.amd.com/forum/index.cfm?forumid=1 FuseTalk Hosting Executive Plan http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=122524 2009-11-22T12:19:17 -05.00 ruki007 2 http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=122109 2009-11-16T10:27:21 -05.00 Tinderbox (UK) 2
Thanks.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121999 2009-11-13T15:40:34 -05.00 147jk 5
Oops! Sorry I just noticed this should be under "troubleshooting". How do I move it?]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121987 2009-11-13T10:47:18 -05.00 theFan667 1
I really want an Athlon 235e (energy efficent model) for a HTPC build but i can't find them anywhere in the UK.

Someone on ebay (and based in the states) is selling OEM versions of this CPU but I am wondering if buying from a random guy on ebay when they're not in retail stores yet is a bit dodgy, what do you guys think?

Im guessing they must have connections to a big pc manufacturer and have somehow aquired some to sell privately.

If i decide to buy one, is there any way to fully test the CPU to make sure it isn't one that has, for example, been discarded for being faulty or is perhaps really an Athlon 240?

What i would rather do is buy one from a reputable store, anyone know when they should hit the high street?

Thanks,

Tim]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121978 2009-11-13T04:53:00 -05.00 cobra100 2 http://forums.amd.com/forum/me...d=121776&enterthread=y]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121875 2009-11-11T14:25:20 -05.00 NAMIDA 1 http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121776 2009-11-09T10:48:38 -05.00 cobra100 11 http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121628 2009-11-06T10:53:30 -05.00 al himmer 4 both if my current board is crapping out?]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121585 2009-11-05T05:23:11 -05.00 nitinbutee 3 http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121399 2009-11-01T20:19:44 -05.00 nitrogreen 4
Thanks,
Eric]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121390 2009-11-01T17:14:56 -05.00 tossedmycookies 2 Processor is a AMD Athlon 64 X2 Dual Core Processor 6400+.
I just discovered I may be only running one core. Task manager shows one graph called CPU Usage history(top). and another graph below called physical memory usage history. From what I have been reading it should show two graphs for a dual core processor correct?
Other reason I believe this to be true is I ran a test from Performance test7 and my final result was a 733.7. Compared it with other comps base lines and it should be up in the 1000-1200 range.
Could some one help me figure this out please. If the one core is not working I need to know how to get it going.
If more info needed regarding my system will provide.
Thanks, tossed.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=121142 2009-10-28T14:25:19 -05.00 ddmetro 1 Our project is to optimize instruction scheduling in gcc by detecting structural hazards. We looked at the current dfa implementation(gen-automata.c and insn-automata.c). We are trying to come up with a test case for the same, a scenario wherein one of the instructions is stalled due to the resource being used by some other instruction. However, we are unable to do so.
1. We wrote a C program - doing - floating point multiplications, divisions and additions. However in both the files - 'progname.s' file and 'progname.c.190r.sched2' file, the instructions were scheduled for execution in sequential order. We couldn't find a way to detect a stall, by looking at the assembly code generated.
Question: How do we detect that a stall has occurred if execution is being carried out in a particular sequence?
Also we would like to know of a tool, which given a 'progname.s' file, gives details of the execution time of each instruction and the clock cycle in which stall will occur, if execution is carried out in this sequence.

2. We saw that integer operations were already being performed during compilation. Hence we were left with only floating point operations to be looked into for structural hazards.
Question: Once a stall is detected in case of floating point unit being used currently by some other instruction, which instruction can be scheduled in so as to avoid this stall(since integer operations are performed at compile time and floating point units are being used)?

Target machine architecture: 686
Working on: Athlon X2 (K8 architecture)

Thanking you,
Dhiraj]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120983 2009-10-26T04:00:37 -05.00 Trollface 2
I currently have an athlon 64 x2 3800+ (socket am2 (940) Windsor 90nm technology?) on an asrock nf3-vsta mobo with a Radeon 3850 AGP gfx and 3x 1gig 4300 ddr2 ram sticks.
The problem is im on a cash budget and have just got windows 7 and a new sata drive but the nforce 3 and radeon agp mix doesent work, id like a new motherboard for my cpu/ram maybe with the AMD built in 3200 gfx that supports the hybrid tech so when i eventually buy a new pci-e card i could get some extra gfx power.
Im not a tech wizz but i like to play mmo's and currently aion and fallen earth run really bad lol. Any help with a mobo choice would be great! i have a decent psu its like a 700 thermaltake or similar. Thanks in advance!!]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120943 2009-10-25T09:22:04 -05.00 djmarian 2
I have a really old AMD PC.... and another just old one.
This last one has the M2N4-SLI motherboard, an AMD Athlon 64 3000+, 3GB RAM, 250 SATA HDD, 256MB 128bit + shared ATI x550 video card, SAMSUNG SATA DVDRW, and bla bla...
So my point is that the CPU is very bad compared to the rest...
Athlon 64 X2 5400+ (DS),1M,rev.G2,65W,SocketAM2 has just 1MB...
Athlon 64 X2 5600+ (CZ),2MB,rev.F3,89W,SocketAM2 is a little hotter....
they both run kind-of the same from what i found on the internet, so should i buy the 5600 despite the heat?
5200 is also very popular.

Awaiting the best answer and/or other suggestions,
Dan.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120930 2009-10-25T05:01:49 -05.00 ddmetro 4 Hi All,
I have a Compaq Presario(model CQ50-210US) laptop, with AMD Athlon Dual Core QL-62 processor.
What is the underlying architecture in - AMD Athlon Dual Core QL-62 processor? Is it 686 architecture?
Kindly direct us to manuals where we can find the architecture specific details for - AMD Athlon Dual Core QL-62 processor.

Thanking You,
Dhiraj P.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120923 2009-10-25T03:10:57 -05.00 jcksn 15 http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120903 2009-10-24T14:17:06 -05.00 emrussell105 5
My motherboard is an ASUS K8S-LA from my HP Computer. According to the HP site the compatible CPU's for this mb would be:

AMD 64 3700+ (Clawhammer 2.4 GHz)
AMD 64 3400+ (Newcastle 2.4 GHz)
AMD Sempron

Looking for recommendations on what I should look to purchase. I am hoping that when I get the new CPU the PC will start up after installing.

I am in Pennsylvania, USA and will likely buy on-line.

Thanks]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120769 2009-10-22T15:57:37 -05.00 thsettle 1
In searching I found the following 2 upgrades / tweeks for this processor.

Is it OK to use them on the same system at the same time?

1) AMD Dual-Core Optimizer Version 1.1.4

The AMD Dual-Core Optimizer can help improve some PC gaming video performance by compensating for those applications that bypass the Windows API for timing by directly using the RDTSC (Read Time Stamp Counter) instruction. Applications that rely on RDTSC do not benefit from the logic in the operating system to properly account for the affect of power management mechanisms on the rate at which a processor core's Time Stamp Counter (TSC) is incremented. The AMD Dual-Core Optimizer helps to correct the resulting video performance effects or other incorrect timing effects that these applications may experience on dual-core processor systems, by periodically adjusting the core time-stamp-counters, so that they are synchronized.

2) AMD Athlon 64 X2 Dual Core Processor Driver v 1.3.2.16 for Win XP / Server
2003 (x86 and x64)

Allows the system to automatically adjust the CPU speed, voltage and power combination that match the instantaneous user performance need.

Any help would be greatly appreciated.

Todd]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120757 2009-10-22T13:46:34 -05.00 ravi301089 2 AMD ATHLON X2 processor.....under normal circumstances the temprature is 40-45 C
but when i play a game it reaches to 80-85 C.......and after some time the PC shut downs...........do i hav a faulty processor or any other probs plzz help......
details are as follows...
processor:
name:AMD Athlon 64 X2 Dual Processor 5000+
core name:brisbane
package:socket AM2
voltage:1.320V
Motherboard:GA-MA78GM-S2H]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120695 2009-10-21T12:36:42 -05.00 Peterjj 2 http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120626 2009-10-20T04:00:54 -05.00 Peterjj 1
Can the AMD-V feature be enabled on this processor to enable XP mode in WIndows 7 If so Where is the switch in th BIOS.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120604 2009-10-19T16:33:08 -05.00 _AE_ 1
Does the new athlon II x4 605e have HT3.0 ?]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120602 2009-10-19T16:12:43 -05.00 JokeOne 11 What i want to know is what socket my cpu has.. The specific processors come out in 939 and AM2 sockets.. My cpu manual only describes Amd processors in general and doesn't give me a clue..

Any help will be appreciated, thx in advance ]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120445 2009-10-16T13:51:32 -05.00 Skoro 2
Core1: 36C
Core2: 40C
CPU temp: 80C

Im using this heatsink fan:

http://www.aria.co.uk/Products...2%29+?productId=29370

it is a brisbane model i dont see how the tempratures could make sense, ive checked the fans mounted properly and it is. the air coming out the fan isnt hot enough to off a 80C cpu.

i think the sensor may be damaged as ive read up on brisbanes having this problem.. does that mean im not aloud to use my CPU at full load because it turns itself off thinking its too hot.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120416 2009-10-16T07:17:36 -05.00 death101 2 i have a el1210-09 emachine computer at 2.4g
i would like a dule core]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=120347 2009-10-14T18:39:31 -05.00 fatar760 23
I have an Athon 64x2 Dual Core Processor 3800, XP64 and 1GB RAM.

I wish to upgrade my RAM to at least 4GB but not sure what I should and shouldnt be buying.

I have looked at the AMD support page which tells me which memory cards are compatible, yet despite claiming I can get up to 16GB I'm yet to find a card of 2GB that I can actually find to purchase!

I live in the UK - so can anyone suggest any sites or makes/models of memory cards that will get me to 4GB that is compatible with my Athlon.

Cheers in advance ]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119915 2009-10-06T19:51:55 -05.00 Nightfall 2
I run windows XP home edition service pack 3 for the operatiing system.

I have looked every where to see if these things are compatable.

Thanks

Nightfall]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119900 2009-10-06T14:20:04 -05.00 Lemon-Ade 3
Asus A8V delux motherboard,
AMD Athlon 64 3800 (Venice Core) CPU,
Windows XP OS CD.

I'm not sure if the '64' is relevant when selecting the right OS.
Will my original windows XP CD be ok to install, use and then download SP3 after?
Or do I need to buy an XP SP3 CD?
Or does the '64' mean that i need specific Windows XP OS?

I've plenty of catching up to do!]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119873 2009-10-06T02:19:47 -05.00 JazzCat 2
I'm attempting to acquire a processor of some description for someone I know. I know the processor is AMD as I've identified the motherboard as an ASUS M2N4-SLI and it apparently supports a range of processors, some of them being in the Athlon 64 family.

Firstly, I'd like to know, is possible to purchase these older chips from anywhere. Could I purchase them online from AMD directly? I'm in Australia and I'm a bit of a novice at the subject. I'm also wondering which would be the best chip to buy (fastest). The ASUS site lists a number of supported CPU's but doesn't give any indication as to which is faster as far as I can see. Maybe speed ranges from top to bottom?

Any clues on this would be great.

Thanks.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119857 2009-10-05T17:22:56 -05.00 leogets 16
Can someone please tell me what is the FSB of the Athlon 64 or X2 or X4 processors.

I put in 2Gb of DDR2 PC2-6400 800MHz memory but they will only operate at 400MHz. I have ASUS Motherboards that offer overclocking but I don't want to use the OC feature to increase the FSB.

5200+ cpu's have from what I can see using CPU-Z; Only a 200MHz Bus speed. and memory is operating at 400MHz only.
same goes for the 5600+ cpu in another computer.

What is the sense in buying fast 800MHz, 1066MHz or 1333MHz memory modules is they will only operate at 400MHz.

Using ASUS's Overclocking feature to increase the FSB from 200MHz to 400MHz also increases the CPU's speed. What crap is this.

AMD does not post the FSB of their CPU's on their specification sheets pretaining to their processors.... AGAIN what is the sense in buying DDR3 fast memory if these processors only operate with a FSB of 200MHz.


Can anyone else confirm what I am saying...

Thanks to all.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119695 2009-10-02T11:35:20 -05.00 Manic2006 1 http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119692 2009-10-02T10:55:40 -05.00 Argentvs 9
Y need to know if the new Atlhon II X4 processors can run (or works, if it say like that or something) on motherboards Socket AM2+.

I`ve the M3N72-D, i found web pages that talk about the AM3 processors can be use on the AM2+ sockets but sellers on "Mercado Libre" (like Ebay) answered me NO.
Really i`m need a socket AM3 (M4N72 for example) for use de Atlhon II X4?.

Tanks for your atention, greetings!.

Again, sorry my bad english & good lucky.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119653 2009-10-01T10:51:48 -05.00 sayto 1 I need help I wish to overclock and always wore but there are no programs that I run on Windows 7 and my bios does not see any way or know someone grabs me and hopefully
coolnquiet the program seems to have that option overclok my processor if so tell me how do I run win7
now I leave my pc info
my motherboard is ECS C51GM-M
DualCore processor AMD Athlon 64 X2, 2000 MHz (10 x 200) 3800 + Windsor-512
memory DIMM1: Kingston 512 MB DDR2-400 DDR2 SDRAM (5-3-3-8 @ 200 MHz) (4-3-3-8 @ 200 MHz) (3-3-3-8 @ 200 MHz)
DIMM2: M3 78T6553CZ3-CE6 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)

for those who want to help me leave you to download an html document with a summary of my system http://uploading.com/files/741334cm/Report.htm/

good I hope that this info will help me
thank you very much greetings]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119622 2009-09-30T20:17:45 -05.00 cavediver 6 http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119609 2009-09-30T15:56:24 -05.00 Poea 3
Because of lite budget, i must choose motherboard between this :

*ECS A780GM-A - spec

*Biostar TA780G M2 HP+ - spec

*MSI KA780GM - spec



Which one can someone recommend for me to use with Athlon II X2 250.

I really hope can get advice from here.

thanks,]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119595 2009-09-30T12:28:20 -05.00 speed32219 7
Low power, $$$ savings, passive cooling. We loved them for our htpc builds.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119531 2009-09-29T07:58:40 -05.00 milantom 2
Computer Type ACPI Uniprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
CPU Type AMD Athlon 64, 2000 MHz (10 x 200) 3000+
Motherboard Name Asus K8N4-E (3 PCI, 3 PCI-E x1, 1 PCI-E x16, 3 DDR DIMM, Audio, Gigabit LAN)
Motherboard Chipset nVIDIA nForce4-4X, AMD Hammer
System Memory 1536 MB (PC3200 DDR SDRAM)
DIMM1: Kingston K 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2: Kingston K 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119493 2009-09-28T11:35:41 -05.00 mab1958 1 I have a few questions about them.
Should I change the combinations of procs/mobo's ? 4050e with the Giga-mobo for instance. Anybody any experience with it ?
Further I'm overclocking the procs but only on stock voltages.
I've changed the FSB of the 4050e to 220 and of the 4850e to 221 and upping them 1 Mhz almost every day at the moment.
Anybody know the max OC of these procs on stock voltages ?
Further info on OCing is welcome. Changing the mp and/or fsb.
Unfortunately now I do not have a provider so I'm only surfing now and then.]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119441 2009-09-27T01:52:59 -05.00 pinstar 3 http://i463.photobucket.com/al...instar100/Untitled.jpg]]> http://forums.amd.com/forum/messageview.cfm?catid=21&threadid=119433 2009-09-26T22:58:18 -05.00 MontyMon 19
I've tried everything to get the system to recognize all of the new RAM with no success. I tried adding the /3GB to the boot.ini file, I've had no luck in the M/B manual trying to find a jumper or some setting to change. Everything I read tells me it should see the RAM but not use all of it. I can't get it to even see it.

Any suggestions would be greatly appreciated.]]>