<?xml version="1.0" ?> 
<rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:slash="http://purl.org/rss/1.0/modules/slash/" xmlns:wfw="http://wellformedweb.org/CommentAPI/">
<channel>
  <title>AMD Processors - AMD Phenom" General Info and Specs</title> 
  <description></description> 
  <link>http://forums.amd.com/forum/index.cfm?forumid=1</link> 
  <generator>FuseTalk Hosting Executive Plan</generator> 

	<item>
		<title>Please Help me with AMD Phenom II 955 x4</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122527</link> 
		<pubDate>2009-11-22T13:10:59 -05.00</pubDate> 
		<dc:creator>Leningr</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ First of all hello to everyone here, i am new <img src="i/expressions/face-icon-small-smile.gif" border="0"> And i am so sorry form my english. Ok, let's move to the subject.<br /><br />I have just bought AMD PHENOM II 955 x4 and motherboard: Gigabyte MA785-UD3H. I have done my format, i installed windows 7, my computer is:<br /><br />cpu: AMD PHENOM II 955 x4 BLACK EDITION<br />VGA: XFX 8800GTS 320MB 320bit<br />RAM: 2GB kingstone sta 667MHz<br />HDD: 250GB<br />trofodotiko: 580Watt<br />Motherboard: GIGABYTE MA785G-UD3H<br /><br />Each time i am playing games, after 4-7 minute, my computer is off, i have tried 4 games and it the same, help me please, i don't have change anything in bios mode. Thanks]]></description>
	</item>

	<item>
		<title>AMD Phenon II X4 810 Quad Core</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122442</link> 
		<pubDate>2009-11-20T22:17:35 -05.00</pubDate> 
		<dc:creator>charan</dc:creator>
   	    <slash:comments>1</slash:comments> 
		<description><![CDATA[ What is the maximum RAM supported by this platform?]]></description>
	</item>

	<item>
		<title>New 955 BE Build</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122386</link> 
		<pubDate>2009-11-20T04:56:33 -05.00</pubDate> 
		<dc:creator>treat9966</dc:creator>
   	    <slash:comments>5</slash:comments> 
		<description><![CDATA[ This is my first AMD build and was wondering you could look at it and point out any possible problems.  This will be a gaming rig, and used for photo/video editing in cs4<br /><br />AMD Phenom II X4 965 BE 125w<br />ASUS Crosshair III Formula<br />G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) x2<br />XFX Radeon 5770 (2 running in crossfire)<br />WD Black 640gb Hardrive<br />Antec 1200 case<br />Antec cp-850 850w psu<br />Windows 7 home Premium 64-bit<br />ARCTIC COOLING Freezer 7 Pro Rev.2<br /><br />I need this system to last 4-5 years with minimal upgrades as the funds for the build are a one-time deal.  Any comments are greatly appreciated.<br /><br />*edit  After doing some more research i discovered i needed the 965 BE to use 4 dimms and get a total of 8 gigs,  and that i was limited to pc3 10600, updated accordingly]]></description>
	</item>

	<item>
		<title>upgrading an AM2 to AM2+</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122384</link> 
		<pubDate>2009-11-20T03:53:36 -05.00</pubDate> 
		<dc:creator>Eldancohen</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ Hey,<br />can I install an AM2+ processor on an AM2 socket?<br />I would to upgrade my Athlon X64 +3200 (AM2 socket) to a Phenom 9950 (AM2+), is it possible?<br /><br />Thanks!]]></description>
	</item>

	<item>
		<title>Athlon II X3 435 Core Voltage</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122336</link> 
		<pubDate>2009-11-19T12:42:02 -05.00</pubDate> 
		<dc:creator>&roo</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ Hi<br /><br />I have an Athlon II 435 processor (ADX435WFGIBOX) and am looking for info on what the core voltage should be. The AMD page <a target=_blank class=ftalternatingbarlinklarge href="http://products.amd.com/en-us/DesktopCPUDetail.aspx?id=611&f1=&f2=&f3=&f4=&f5=&f6=&f7=&f8=&f9=&f10=&f11=&f12=">here</a> gives all the basic info but omits the voltage.<br /><br />Can anyone give me or direct me to the voltage details for this processor?<br /><br />I've seen a spec on a non AMD site that says 0.875V - 1.425V, if this is correct, where in this range would you run the processor for normal (non - overclocking) use? i.e. What voltage would a mainboard select on 'auto'?<br /><br />Any help will be greatly appreciated. <img src="i/expressions/face-icon-small-smile.gif" border="0"><br /><br />Cheers - Andy]]></description>
	</item>

	<item>
		<title>Newby in need of some info</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122146</link> 
		<pubDate>2009-11-16T22:13:03 -05.00</pubDate> 
		<dc:creator>alfstan</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ Hi <br />I just bought an AMD Phenom ll X4 965 Black Edition CPU from Fry's.  I haven't installed it on a motherboard yet. It's going on an ASUSM4A78T-E board with 4 Gb of DDR3 1600 (PC3 12800) memory.  I don't plan on trying to oc it or do anything fancy with it.  I'm not a gamer.  I have a couple of questions that I'd like some help on if possible.  <br /><br />1.  How can you tell what wattage the cpu is?  It says it a model HDZ965FBGMBOX   <br /><br />2.  Is the cooler that comes with the cpu okay or should I get another one?  This cooler has 4 heat pipes on it.  <br /><br />3.  Is the thermal interface material that is on the heat sink okay or should I add more when I assemble it with the motherboard?<br /><br />Sorry to be a dunce but I don't want to screw this up.  I have to limited a budget to take chances.<br /><br />alfstan]]></description>
	</item>

	<item>
		<title>Raid Question</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122123</link> 
		<pubDate>2009-11-16T14:44:56 -05.00</pubDate> 
		<dc:creator>JonJon</dc:creator>
   	    <slash:comments>4</slash:comments> 
		<description><![CDATA[ On the AMD 770 chipset, when installing windows XP SP3 Professional, will I be required to use a sata/raid floppy if I am to use a raid 0 configuration?<br /><br />Also, if I do, how could I "slipstream" the sata/raid drivers into my windows xp iso? (It's a legit copy, I get free licenses through teh MSDNAA program at my college)]]></description>
	</item>

	<item>
		<title>Phenom 9850 x4 9850 BE 3GHz Overclock</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122076</link> 
		<pubDate>2009-11-15T10:52:02 -05.00</pubDate> 
		<dc:creator>wray07</dc:creator>
   	    <slash:comments>1</slash:comments> 
		<description><![CDATA[ I got my 9850 x4 black edition to 3GHz per core. System is 100% stable and averages out around 41* celcius under full load. I tried going to 3.2GHz, but I could not get it stable. I'm new to overclocking, so I'm sure there is a way to do it, but I think 3GHz is good for my first time. I used a Corsair H50 cpu cooler. All fans in my case are set to lowest speed. <br /><br /><img src="http://img690.imageshack.us/img690/9356/core.gif"><br /><br /><img src="http://img690.imageshack.us/img690/8660/temp.gif">]]></description>
	</item>

	<item>
		<title>Question about AMD Power Monitor and Phenom II X4 965</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122053</link> 
		<pubDate>2009-11-14T21:03:55 -05.00</pubDate> 
		<dc:creator>jtahlgrim</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ When using AMD Power Monitor set to Minimal Power Management, I get a significant drop in temperature (39&#176;C to 32&#176;C idle using stock fan) but I want to know if there will be power fluctuation issues that can damage my CPU.  Thanks for reading.]]></description>
	</item>

	<item>
		<title>AMD 955 VID</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=122007</link> 
		<pubDate>2009-11-13T17:56:52 -05.00</pubDate> 
		<dc:creator>Bigun08</dc:creator>
   	    <slash:comments>1</slash:comments> 
		<description><![CDATA[ Ok just a quick question what is the CPU vid and what is a good round about setting for it.. and finally why .. thanks]]></description>
	</item>

	<item>
		<title>Phenom II 125 watt 965 BE Thread</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121873</link> 
		<pubDate>2009-11-11T13:33:15 -05.00</pubDate> 
		<dc:creator>PC-GURU -</dc:creator>
   	    <slash:comments>725</slash:comments> 
		<description><![CDATA[ Ordered mine next day today. <br /><br /><img src="http://i37.tinypic.com/rk7fc0.jpg"><br /><br />Lets use this thread to compare our results with this bad boy.]]></description>
	</item>

	<item>
		<title>AMD Phenom II X4 965 Black Edition and Asus M2N-SLI-DELUX</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121864</link> 
		<pubDate>2009-11-11T10:17:14 -05.00</pubDate> 
		<dc:creator>kbenson</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ Hi, I know that people have successfully used the Phenom 96500 in this mother board but will the the Phenom II work... from what I gather the difference is that Phenom II is manufactured 45nm process.<br /><br />Thanks for your help<br /><br />kent]]></description>
	</item>

	<item>
		<title>Does Phenom II support 1600mhz DDR3?</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121853</link> 
		<pubDate>2009-11-11T03:52:23 -05.00</pubDate> 
		<dc:creator>flash110</dc:creator>
   	    <slash:comments>17</slash:comments> 
		<description><![CDATA[ Hi!, I read in wikipedia that PhenomII and I think all the latest AMD chips support DDR3 but only in its low speed version of 1333mhz, is it true? is it impossible to run DDR3 RAM at 1600mhz or higher? if that&#180;s the case I wonder why should I even bother to update to DDR3 with amd, considering DDR2 has lower latencies even a DDR2 at 800mhz or 1066mhz could be even faster than DDR3 at 1333mhz with higher latencies... anyone knows?]]></description>
	</item>

	<item>
		<title>replacing the phenom 955 stock cooler with a more quiet one</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121813</link> 
		<pubDate>2009-11-10T09:00:52 -05.00</pubDate> 
		<dc:creator>Major_Tierce79</dc:creator>
   	    <slash:comments>6</slash:comments> 
		<description><![CDATA[ Hi,<br /><br />I would like suggestions to replace the phenom II x4 955 stock cooler with a much quieter one?<br /><br />When I start a game like dragon age or COD MW2 I can't hear myself think because it is so loud.<br /><br />Cheers]]></description>
	</item>

	<item>
		<title>Upgrade? Phenom 9600 BE to Athlon x2 7850</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121745</link> 
		<pubDate>2009-11-08T15:34:50 -05.00</pubDate> 
		<dc:creator>tedd139</dc:creator>
   	    <slash:comments>4</slash:comments> 
		<description><![CDATA[ I currently own an Asus M2N-SLI Deluxe which is am2/am2+ mobo.  I have been having issues with my Phenom 9600 quad core's performance with gaming.  I have 6 gigs of DDR2800 ram/ Phenom 9600 2.4gh quad core/.  If I substitute my Phenom 9600 for an Athlon x2 7850 would I lose more performance. I know the first gen Phenoms aren't the best performers.  Or has anyone had luck with a Phenom II with this mobo.  I know its unsupported officially but others have it working.. wonder how stable.  Thanks!]]></description>
	</item>

	<item>
		<title>help plzzzzzzzzz</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121733</link> 
		<pubDate>2009-11-08T12:50:21 -05.00</pubDate> 
		<dc:creator>abhi2007b</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ can anybody plzzz provide me with a detailed architecture of amd phenom x3 triple core processor 8600b..<br />it is really urgent.....<br />plzzzzzzzzzzzzzzzzzzzzz]]></description>
	</item>

	<item>
		<title>Can&apos;t POST</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121625</link> 
		<pubDate>2009-11-06T08:10:33 -05.00</pubDate> 
		<dc:creator>KimD</dc:creator>
   	    <slash:comments>12</slash:comments> 
		<description><![CDATA[ Hi,<br /><br />I have an ASUS M4A79 Deluxe board and at the moment it is running an old Athlon x2 6000 cpu and this works well. I bought a Phenom II x4 955 3.2 GHz  (Man Part #HDZ955FBGIBOX), installed it and can't get the system to POST, fans starts and I think it boots the BIOS then it hangs (no video signal). I have two questions which might be relevant to the problem :-<br /><br />1) Does the M4A79 Deluxe support this processor?<br />2) Is a 620 watt psu (see my sig) up to running this rig?<br /><br />I don't think the Phenom is broken as this is the second processor I have tried on this board (Novatech UK kindly replaced the first one).<br /><br />Help please as ASUS tech support are useless...]]></description>
	</item>

	<item>
		<title>Phenom II x3 &quot;z715&quot; mystery cpu... does it even exist?</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121397</link> 
		<pubDate>2009-11-01T19:32:08 -05.00</pubDate> 
		<dc:creator>XCom-UFO</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ Hello people;<br /><br />To keep it short:<br />I have an AM2 motherboard (AM2 without the +)<br />and I am looking for a cpu upgrade.<br />I currently have an Athlon 64 3800+ EE,<br />and I would like to upgrade to a cpu with more cores.<br /><br />I've seen the reviews about the ne Athlon II and Phenom II CPUs, and they look very promising, even though I am limited to a 95W tdp CPU.<br /><br /><b>There is 1 problem though:<br />Almost all motherboard manufacturers claim motherboard compatibility for their AM2 (without the +) motherboards with only 1 specific Phenom II,<br />and that is the Phenom II x3 "z715", part number HDZ715WCJ3DGI.</b><br /><b>The problem with this cpu is that it does not seem to exist...</b><br />Even www.amdcompare.com does not state it; so even AMD itself does not seem to know this cpu.<br /><br />So, is this cpu a Halloween creation, or is their more to it?<br /><br />My AM2 motherboard is an <b>MSI K9AG Neo2-Digital</b>, and as with other motherboard manufacurers like ASUS etcetera, MSI lists this CPU as the ONLY Phenom II which they list as being supported on their AM2 mobos.<br /><br />So, what is going on?<br />Is this cpu just a typo?<br />Very unlikely, as many mobo manufacturers state it on their website as the only Phenom II capable of running on their AM2 mobos (AM2 without the +).<br />Or was this cpu on AMD's roadmap some day, but did AMD decide later not to manufacture it?<br /><br />It puzzles me, as this cpu is nowhere to be found on this planet,<br />and I'm looking to upgrade my cpu.<br />If my AM2 mobo will not support Phenom II of Athlon II CPUs, then i'll go for an Athlon 64 x2 (K8),<br />but I would like to know this as soon as possible, because the K8s are gettting harder to find.<br /><br />Thank you very much in advance;<br />Carl]]></description>
	</item>

	<item>
		<title>Phenom II 965 with Crosshair II</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121357</link> 
		<pubDate>2009-11-01T06:30:17 -05.00</pubDate> 
		<dc:creator>jwagdy</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ All,<br /><br />I have Asus Corssair II Formula M/B with AMD Phenom X4 9950 and 4GB DDR2 Corsair Dominator.<br /><br />I want to upgrade but I can't afford changing the whole thing (M/B, CPU, and RAM). I know that AM+ boards will accept AM3 CPUs but the opposite isn't true. So I am thinking of changing the CPU and getting something top of the line. By doing that I would<br />1. Accomplish the upgrade with minimum costs.<br />2. Get the max performance from the hardware I already have without OCing.<br />3. I still can OC the system and get the max out of the hardware.<br /><br />According to the latest Bios update from Asus, it should work smoothly (they even up-ed he board to accept 16GB of RAM) but I have some bad experience long time ago with this kind of upgrades.<br /><br />My question, has anyone tried to install a 955 or 965 on a Corssair II Formula?<br /><br />if yes, any problems or issues I have to plan to avoid?<br /><br />thanks in advance]]></description>
	</item>

	<item>
		<title>Can I use AMD Overdrive with ASUS MB with 785G/SB710?</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121310</link> 
		<pubDate>2009-10-31T10:49:14 -05.00</pubDate> 
		<dc:creator>elgercee</dc:creator>
   	    <slash:comments>6</slash:comments> 
		<description><![CDATA[ Please bear with me--I'm a retired geezer trying to navigate his way around the concept of overclocking. I have an ASUS motherboard, Model M4A785-M (AMD 785G chipset and SB710) and an AMD Phenom II X2 BE550 black CPU. I have seen numerous references to "AMD Overdrive on the AMD site. My question is simple: Can I use AMD Overdrive with this motherboard/CPU combination? Do I want to use AMD Overdrive? Thanks for any help. (If this is not the right forum, please let me know what is the correct one.)]]></description>
	</item>

	<item>
		<title>Phenom X4 9850 coprocessor driver for Windows 7</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121279</link> 
		<pubDate>2009-10-30T18:47:56 -05.00</pubDate> 
		<dc:creator>jrlorang</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ Windows 7 Home  says it can not find a driver for the coprocessor.<br /><br />I looked but could not find one on the AMD site.]]></description>
	</item>

	<item>
		<title>Need X4 945 compatible motherboard</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121208</link> 
		<pubDate>2009-10-29T16:51:29 -05.00</pubDate> 
		<dc:creator>somebody3</dc:creator>
   	    <slash:comments>8</slash:comments> 
		<description><![CDATA[ Hi. I have bought a [url=http://www.ebuyer.com/product/172684]AMD Phenom II X4 945 3.0GHz Socket AM3 6MB L3 Cache[/url] but the motherboard I purchased does not support this CPU (even though it states it is am3 compatible).<br /><br />Can someone please advise which motherboard will support this cpu off the bat (without needing an old cpu to upgrade bios)?<br /><br />The last computer I built also had a motherboard that did not support the CPU that I bought with it but luckily it used the cpu as "unknown processor" and allowed me to update the bios.<br /><br />Thanks.]]></description>
	</item>

	<item>
		<title>Phenom II 920 beginning to slowly degrade...</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121172</link> 
		<pubDate>2009-10-29T01:55:43 -05.00</pubDate> 
		<dc:creator>Flyordie</dc:creator>
   	    <slash:comments>5</slash:comments> 
		<description><![CDATA[ So, I bought my Phenom II and paired it up with a DFI LANParty 790GX-M2RS. I am very pleased with the overall performance, however... over time I have had to slowly ramp the voltage up... I started at 1.375V and now I have to push 1.475V through it just to keep from BSOD'n.  Temps are 29C Idle, 40C load.  The Batch # on my 920 is 0849 (Year-2008, Week 49). This is a PIB, CPU purchased from Newegg.  Any advice on what to do before an RMA attempt is done would be helpful. ;-)<br /><br />If it reaches 1.5V, I will have to RMA, however, I am unable to RMA because AMD's site is not allowing me to register for some unknown reason... no error codes or anything like that are returning from the site.]]></description>
	</item>

	<item>
		<title>PhenomII X3 715?</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121123</link> 
		<pubDate>2009-10-28T04:46:11 -05.00</pubDate> 
		<dc:creator>Stefo78</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ Hi!<br />This is my first post in this forum, i'm writing from Italy just to have som informations about the cpu in the title.<br />My mother board (asus M2n-SLI) with socket Am2+ supports the CPU PhenomII X3 715, but i can't find it nowehere.... even on the amd website. Does it exist? <br />The OPN fpr this CPu is HDZ715WCJ3DGI... it's my last chance to upgrade this system and i don't wont to buy a new motherboard yet.... someone please help me to discover the truth <img src="i/expressions/face-icon-small-wink.gif" border="0">]]></description>
	</item>

	<item>
		<title>PhenomII x4</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=121112</link> 
		<pubDate>2009-10-27T23:10:50 -05.00</pubDate> 
		<dc:creator>Dinodan74</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ bought as follows<br /><br />biostar tforce ta790gx 128mb am3/am2+/am2<br />phenomII x4 955 BE<br />Gskill ddr2 pc2 6400<br />coolmaster silent pro600<br />WDblack 640GB sata<br /><br /><br />looking thru motherboard book the lights on the mother board flash ram problem is there a compatibility issue with the 6400?]]></description>
	</item>

	<item>
		<title>Can&apos;t download AMD Cool &amp; Quiet Driver</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120918</link> 
		<pubDate>2009-10-24T23:52:45 -05.00</pubDate> 
		<dc:creator>imamage</dc:creator>
   	    <slash:comments>3</slash:comments> 
		<description><![CDATA[ I am trying to build an new rig for my friend with Athlon II x2 425  <br />He's using Windows XP SP3 and he need to install the AMD CPU Cool & Quiet Driver<br />So I went to  "Support & Driver "  link to search for the driver <br /><br />The link comes up <br /><a target=_blank class=ftalternatingbarlinklarge href="http://support.amd.com/us/psearch/Pages/psearch.aspx?type=2.1&product=&contentType=Tech%20Download%20Processor">http://support.amd.com/us/psea...0Download%20Processor</a><br /><br /><br /><br />AMD Processor Driver Version 1.3.2.0053 for Windows XP and Windows Server 2003 (x86 and x64) 	 	8/31/2007<br /><a target=_blank class=ftalternatingbarlinklarge href="http://support.amd.com/us/Pages/dynamicDetails.aspx?ListID=c5cd2c08-1432-4756-aafa-4d9dc646342f&ItemID=173">http://support.amd.com/us/Page...9dc646342f&ItemID=173</a><br /><br />When I click it <br /><br />"Unable to connect to database.  Check database connection information and make sure the database server is running."<br /><br />Is the AMD Cool & Quiet Driver no longer available for Download???<br /><br />Thanks]]></description>
	</item>

	<item>
		<title>Amd x3 phenom 8650 2.30GHz</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120761</link> 
		<pubDate>2009-10-22T14:15:48 -05.00</pubDate> 
		<dc:creator>6f6u6</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ i have a problem my amd phenom x3 2.30GHz. but now its running at 1.20 what should i do i dont know what happen. its that normal or what.? plsss help thank you. i format my pc and reset the bios setup nothings change its stil 1.20GHz.<br /><br />my pc spec<br /><br />GF8100 m2+se<br />2gb memory<br />1gb video card<br />amd phenom x3 2.30GHz but now its 1.20GHz]]></description>
	</item>

	<item>
		<title>945 specs?</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120541</link> 
		<pubDate>2009-10-18T14:27:29 -05.00</pubDate> 
		<dc:creator>ntesla</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ I could not find all the specs on the AMD website, maybe you know where to find all this stuff for a HDX945FBK4DGI- that's a 945 Phenom II X4, 125 Watt 3 Ghz.<br />What is the max FSB speed supported?<br />What is the max HTL speed supported?<br />Other specs, besides the usual consumer specs? Temperature ratings?<br />I don't want to overclock the poor thing, just want to bring it up to speed that is supported by the design.<br />The MOBO BIOS adjusts to any imaginable frequency for FSB and HTL, but the default is much slower than the rated speed of the processor.<br />Know where the information might be located? Can you give me a link?<br />Thanks to all, appreciate that! -NT<br /><br />Asus M4A79XTD<br />Velociraptor<br />Antec 550+<br />AMD 945 3 Ghz<br />GSkill DDR3 1600<img src="i/expressions/face-icon-small-happy.gif" border="0"><br />Sapphire HD4870<br /><br />-------------------------<br />nicola.madscientist.tesla]]></description>
	</item>

	<item>
		<title>FPS problems in games phenom 2 quad core 2.4, 275 GTX.</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120430</link> 
		<pubDate>2009-10-16T09:14:53 -05.00</pubDate> 
		<dc:creator>slacker83</dc:creator>
   	    <slash:comments>41</slash:comments> 
		<description><![CDATA[ Hi, 2 months ago I bought these parts to make a pc.<br />Here is my spec:<br /><br />Procesor: AMD Phenom 9750 Quad-core, MMX, ~ 2.4GHz<br />RAM Memory: 4GB<br />OS : Windows XP SP 3<br />Graphic Card: NVIDIA GeForce GTX 275, 896MB<br />Power Supply: Thermaltake 550W<br /><br />In the first month I was playing crysis for example on very high settings (Hack tool) and I had a pretty good fps, now im getting like 20-25 fps, not playeable, World of wacraft runs on about 20-45 fps when NOT in a major city, I heard other people getting about 80- 90 fps in wow on a much lower performance pc than mine.I'm really frustrated, I tried everything to solve this, like installing 3 versions of windows, reformated my HDD, got the latest drivers and none of this solved my problem, i'm still getting 20 fps in wow and 25 in crysis etc.]]></description>
	</item>

	<item>
		<title>help plz</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120427</link> 
		<pubDate>2009-10-16T09:04:54 -05.00</pubDate> 
		<dc:creator>thebest200</dc:creator>
   	    <slash:comments>6</slash:comments> 
		<description><![CDATA[ 1st sorry if i am posting at the wrong place but i am new here and bit confused<br />i have amd phenom ii 955 be processor , i decresed the defaults voltage of mobo to decrese the temp of the processor and using cool n quiet also i usually also control the fans speed of my processor and decrease it because its very loud ,...<br />i usually make the fans speed while playing games or something needs it so a few days ago i forgot to do that and after some time i found my cores temp went to 78 degree celesius ! and the cpu kept working without any warnings or anything so plz tell me what should i do and thanx and sorry for the long post ....]]></description>
	</item>

	<item>
		<title>Virtualization Technology Support: Yes ??</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120394</link> 
		<pubDate>2009-10-15T16:16:04 -05.00</pubDate> 
		<dc:creator>Tomy_amd</dc:creator>
   	    <slash:comments>8</slash:comments> 
		<description><![CDATA[ Over at newegg.com the specs for some Phenom II processors have the phrase "Virtualization Technology Support: Yes" and similar processors do not use this phrase.<br /><br />AMD Phenom II X4 945 Deneb 3.0GHz Socket AM3 125W <br /># Processors Type: Desktop<br /># Series: Phenom II X4<br /># L2 Cache: 4 x 512KB<br /># L3 Cache: 6MB<br /># Manufacturing Tech: 45 nm<br /># 64 bit Support: Yes<br /># Hyper-Transport Support: Yes<br /><b># Virtualization Technology Support: Yes</b><br /># Model #: HDX945FBGIBOX<br /><br />AMD Phenom II X4 955 Black Edition Deneb 3.2GHz Socket AM3 125W<br /># Processors Type: Desktop<br /># Series: Phenom II X4<br /># Hyper Transports: 4000MHz<br /># L2 Cache: 4 x 512KB<br /># L3 Cache: 6MB<br /># Manufacturing Tech: 45 nm<br /># 64 bit Support: Yes<br /># Hyper-Transport Support: Yes<br /># Model #: HDZ955FBGIBOX<br /><br />Why is the virtualization phrase used in some Phenom specs -- do they have any different virtualization features??]]></description>
	</item>

	<item>
		<title>Revisiting my core temp</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120389</link> 
		<pubDate>2009-10-15T15:29:52 -05.00</pubDate> 
		<dc:creator>Merlin5</dc:creator>
   	    <slash:comments>10</slash:comments> 
		<description><![CDATA[ I posted about my core temp being considerably lower than cpu temp a while ago, and I'd like to try and get to the bottom of it a little bit more if I can.<br /><br />I do get good temps and I'm not concerned about it overheating since I have loads of powerful fans, a good case, an ultra 120 extreme, and a thermalright vga cooler. Under load, nothing increases by more than 3 or 4c.<br /><br />So, cpu temp at idle is currently 36c, core temp at idle 19c. Both go lower with all fans on full blast, but for now, that's what they are with fans at lowest. Core temp obviously wrong. It's lower than room ambient, and far lower than cpu temp. So what do you think my real core temp is? Will it be a figure above the 36c cpu temp, and by how much?]]></description>
	</item>

	<item>
		<title>Which AMD Desktop Processor can commend you?</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120314</link> 
		<pubDate>2009-10-14T09:18:51 -05.00</pubDate> 
		<dc:creator>wtpjoco</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ Hey,<br /><br />If I'm double post, please pardon me.<br />I couldn't find any information about my question.<br /><br />So, I'm in search of a new AMD Desktop Processor.<br />But I realy don't found the pro and the contras.<br /><br />BTW: I want to buy a new product which is really good but do you remember that the quality is top.<br /><br />which processor do you prefer?<br /><br />Sempron?<br />Athlon?<br />Athlon X2?<br />Athlon II<br />Phenom<br />or<br />Phenom II ??<br /><br />Thx for your opinion<br />wtpjoco]]></description>
	</item>

	<item>
		<title>OK 955 @ 4Ghz what do i do now??</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120226</link> 
		<pubDate>2009-10-12T21:48:41 -05.00</pubDate> 
		<dc:creator>Bigun08</dc:creator>
   	    <slash:comments>23</slash:comments> 
		<description><![CDATA[ Hey AMDians.. i finally got to 4Ghz with an AMD chip.. could some of you take a look and tell me if the numbers on my HT are OK i am at 2600 right now.. don't know if there is more to be had it seems super stable and so far 50C is the highest i have been.. but its new and more testing is going to be done.. ASAP<br /><br /><a target=_blank class=ftalternatingbarlinklarge href="http://s722.photobucket.com/albums/ww230/Bigun08/?action=view&current=4Ghz1sttime.jpg">http://s722.photobucket.com/al...urrent=4Ghz1sttime.jpg</a>]]></description>
	</item>

	<item>
		<title>AM2+ AM3 Sockets</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120190</link> 
		<pubDate>2009-10-12T01:41:22 -05.00</pubDate> 
		<dc:creator>jeff7462</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ I have a stock a6650f hp desktop which has a Phenom 9550 Quad 2.2 Ghz chip in it. My Mobo has an AM2+ CPU socket in it and I have just recently purchased a new processor for my PC. The issue is that the processor I just bought is them AMD Phenom Black Quad 3.2 Ghz, which is AM3. I was under the impression that I would still be able to run the CPU on my mobo, but my friend is telling me that this is not true and that by me installing this CPU it would act as a downgrade from what I have in my PC already. Is there truth in this? and if so are there any solutions to this other than buying a new Mobo?<br /><br />Thank you!!!<br />Jeff<br /><br />If it is any more help, here are the specs of my computer from Newegg.com<br /><br />General Spec<br />Brand 	HP<br />Series 	Pavilion<br />Model 	A6650F(FK791AA)<br />Recommended Usage 	Home / Home Office<br />Processor 	AMD Phenom X4 9550(2.2GHz)<br />Processor Main Features 	64 bit Quad-Core Processor<br />Cache Per Processor 	4 x 512KB L2 Cache<br />Memory 	6GB DDR2 800<br />Hard Drive 	500GB SATA 7200RPM<br />Optical Drive 1 	SuperMulti DVD Burner with LightScribe Technology<br />Graphics 	NVIDIA GeForce 6150 SE Graphics with TurboCache with 128MB dedicated graphics memory. Up to 1343MB Total Available Graphics Memory as allocated by Windows Vista<br />Audio 	High Definition Audio<br />Ethernet 	Integrated 10/100 Base-T networking interface<br />Keyboard 	HP multimedia keyboard<br />Mouse 	HP optical mouse<br />Operating System 	Windows Vista Home Premium 64-bit<br /><br />Motherboard<br />Chipset 	NVIDIA nForce 430<br /><br />CPU<br />CPU Type 	Phenom X4<br />Installed Qty 	1<br />CPU Speed 	9550(2.2GHz)<br />L2 Cache Per CPU 	4 x 512KB<br />CPU Socket Type 	AM2+<br />CPU Main Features 	64 bit Quad-Core Processor<br /><br />Graphics<br />GPU/VPU Type 	NVIDIA GeForce 6150 SE<br />Graphics Interface 	Integrated video<br /><br />Memory<br />Memory Capacity 	6GB DDR2<br />Memory Speed 	DDR2 800<br />Form Factor 	DIMM 240-pin<br />Memory Spec 	2GB x 2 & 1GB x 2<br />Memory Slots (Available/Total) 	0/4<br />Maximum Memory Supported 	8GB<br /><br />Hard Drive<br />HDD Capacity 	500GB<br />HDD Interface 	SATA<br />HDD RPM 	7200rpm<br /><br />Optical Drive<br />Optical Drive Type 	DVD Super Multi<br />Optical Drive Spec 	SuperMulti DVD Burner with LightScribe Technology 16x DVD&#177;R, 8x DVD+RW, 6x DVD-RW, 8x DVD+R DL, 8x DVD-R DL, 12x DVD-RAM, 16x DVD-ROM, 40x CDR, 32x CDRW, 40x CD-ROM<br /><br />Audio<br />Audio Chipset 	Integrated<br /><br />Communications<br />LAN Chipset 	Integrated<br />LAN Speed 	10/100Mbps<br />Front Panel Ports<br />Front USB 	2<br />Front IEEE 1394 	1<br />Front Audio Ports 	2<br />Card Reader 	Front panel 15-in-1 memory card reader: supports SmartMedia, xD, MultiMedia Card, Secure Digital (SD), Mini Secure Digital, Compact Flash I, Compact Flash II, IBM Microdrive, Memory Stick, Memory Stick Pro, Memory Stick Duo, Memory Stick Pro Duo, RSMMC, MMC Mobile, MMC+<br />Back Panel Ports<br />PS/2 	2<br />Video Ports 	1 VGA<br />Rear USB 	4<br />Rear IEEE 1394 	1<br />RJ45 	1 port<br />Rear Audio Ports 	6 ports<br />S/P DIF 	SPDIF out (coaxial)<br /><br />Expansion<br />External Bays 	2 x 5.25" external<br />1 x 3.5" external<br />Internal Bays 	2 x 3.5" internal<br />PCI Slots (Available/Total) 	(1/1) PCI slot<br />(1/1) PCI-E x16 slot<br />(2/2) PCI-E x1 slots<br /><br />Mouse<br />Mouse Type 	Optical<br /><br />Keyboard<br />Keyboard Type 	HP multimedia keyboard<br /><br />Physical Spec<br />Dimensions 	16.28" x 15.24" x 6.89"<br />Weight 	22 lbs.<br /><br />Manufacturer Warranty<br />Parts 	1 year limited<br />Labor 	1 year limited]]></description>
	</item>

	<item>
		<title>Phenom Quad-core 9750 32 or 64 Bit ?</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=120135</link> 
		<pubDate>2009-10-10T20:48:02 -05.00</pubDate> 
		<dc:creator>bnklogan</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ I have recieved my Windows 7and want to install but don't know if it is 32 or 64 bit.]]></description>
	</item>

	<item>
		<title>Phenom 2 955BE + Tuniq Tower 120 + Corsshair III Formula</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=119996</link> 
		<pubDate>2009-10-08T01:49:55 -05.00</pubDate> 
		<dc:creator>Ajkula999</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ Hi Everyone,<br /><br />I'm planning to buy Corsshair III Formula and use it with my  P2 955BE. I was looking for good CPU Cooler and found the one I like "Tuniq Tower 120" (I couldn't find any straight answers on the website)<br /><br />My Question is: <br /><br />Can I use this cooler with AM3 socket and will it fit on Corsshair III Formula?<br /><br />If anyone could put some light on this, would be much appreciated<br /><br />Thanks]]></description>
	</item>

	<item>
		<title>What is the relation between TDP and power consumption for AMD CPUs</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=119946</link> 
		<pubDate>2009-10-07T10:09:48 -05.00</pubDate> 
		<dc:creator>svata</dc:creator>
   	    <slash:comments>4</slash:comments> 
		<description><![CDATA[ What is the relation between TDP and power consumption for for AMD CPUs.<br />Or can some advise me where can I find what is the maximum power consumption (not the TDP) of AMD CPUs. Thank you in advance!]]></description>
	</item>

	<item>
		<title>p2 955 temps</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=119907</link> 
		<pubDate>2009-10-06T16:42:28 -05.00</pubDate> 
		<dc:creator>Lane68</dc:creator>
   	    <slash:comments>4</slash:comments> 
		<description><![CDATA[ Ive got my 955 oc'd to 3.7 with 4 120mm fans and 1 80 mm and a zalman cooler. I also have a 9800 gx2 giving off some heat. Anyways Ive read here that its the max cpu temp rather than max core temp Im supposed to use with amd's specs for max temp(which is 62c). So Im running at 57c max(load) cpu temp which Im fine with but I dont much like the 60c on my max core temp.<br />I guess Im hoping someone will tell me not to worry about the core temps, the cpu temps are good to go.<br />System is stable.]]></description>
	</item>

	<item>
		<title>AMD Phenom 9500 Quad Core failure?</title>
		<link>http://forums.amd.com/forum/messageview.cfm?catid=318&amp;threadid=119902</link> 
		<pubDate>2009-10-06T15:16:34 -05.00</pubDate> 
		<dc:creator>milo4as</dc:creator>
   	    <slash:comments>2</slash:comments> 
		<description><![CDATA[ Hello everyone, <br />My PC have an AMD Phenom 9500 Quad Core, since I started using it I had some problems with it, a couple of months later I asked to te person who sold me the processor to check it... So he told me that processor was a failed chip with a built in error and nobody in the city was selling it because of that!! So I asked in other places and everybody told me the same thing!!!!<br /><br />I want to know if this is really true, because my processor is having a lot of problems when I start any software and game!!<br /><br />I am a graphic designer, so I have to use several heavy programs!! And my PC got slow too and well... I bought this processor cause I needed a better performance from my PC.<br /><br />Come on guys, plz tell whats going on!!!<br /><br />Thanks for ur help!!!!]]></description>
	</item>

</channel>
</rss>
