AMD Processors - AMD Chipset discussion http://forums.amd.com/forum/index.cfm?forumid=1 FuseTalk Hosting Executive Plan Where can I find an AHCI SATA driver for XP SP3 on a series 9 chipset? http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=161199 2012-09-13T19:56:30 -05.00 pbb 6 I want to run Windows XP 32bit SP3 on an MSI 990FXA-GD65 motherboard with AHCI enabled in the BIOS.

CPU-Z says the chipset is RD9x0 and the Southbridge is SB910/950.

I have tried downloading the XP chipset driver (12-8_xp32-64_sb.exe), but I cannot find any SB9XX AHCI XP drivers in it.

Can anyone advise me where to find the driver?

 

]]> AMD Ahci drivers - V12.8 http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=161185 2012-09-13T01:06:51 -05.00 winner100 1 Hello everyone,

I have a DFI motherboard, model M3H5.
And Intel SSD 330.
Today I installed the driver from AMD - Version: 12.8.

At the end of the installation. the HDD and SSD have become Safely Remove Hardware.

Photo example:
http://cdn.ghacks.net/wp-content/uploads/2010/11/safely-remove-hardware.jpg

I found a solution at the following website:
http://www.overclock.net/t/974023/fix-ahci-sata-drives-showing-in-safely-remove-hardware

But it helps only with I'm with msahci Original
The problem is the driver, I need help please.

]]> Compatibility of AMD and Intel CPUs when 'mfence' instruction is used http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160956 2012-08-31T00:18:58 -05.00 SergeyKostrov 1 I'm a C++ Software Developer and my question is related to compatibility of AMD and Intel CPUs when 'mfence' instruction is used in an application designed and implemented for Intel CPUs in the first place.

I've read that some older AMD CPUs do not support that instruction. Is that correct?

Could you provide as much as possible information on which AMD CPUs did not support 'mfence' instruction? How many years ago was it?

Are there any references I could look at on AMD web-site, like links to docs, C++ or ASM examples?

Could you provide some tips for implementing programming solutions on older AMD CPUs when 'mfence' instruction is not supported.

Best regards,

Sergey

]]> APU 3500 + HD6570 Crossfire issue http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160735 2012-08-19T21:59:52 -05.00 wintersyc 1 English is not my mother language, I try to discribe my issue in details.
I have a new system just established with A6-3500+A75 mobo + HD6570 graphic card?
Now the issue is that, once I plug in my HD6570(connect to LCD), the IGD 6530D could not be recognized.(from device manager, gpu-z etc.)
And also all the 4G memory is available to use, no memory is allocated for 6530D. If I connect the display to IGD, no signal.

After I remove HD6570 and reboot the system, 6530D works properly(connect to LCD). and 512MB memory is allocated for IGD(3.48G available)
So, the PCIE graphic card and integrated gpu can not be recognized simultaneously. Therefore, No Dual Graphic option under performance in CCC.
It seems that IGD is auto disabled when a PCIE graphic is attached.

system info:
A6-3500 at default freq, no overclocking
Biostar TA75M+,
G.Skill DDR3 1600Mhz 2G X2,
HD6570 512MB,
300w power supplier
Win7 64bit SP1
CCC version 12.8, profile 12.7 cap3

Thank you.]]> Cant update my drivers, catalyst prgram is bugged, slow frames per second. http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160509 2012-08-08T03:24:28 -05.00 scaleblue 1 AMD radeon HD 6620G, 512MB Graphics system memory
4GB DDR3 RAM
Windows 7 64-bit home premium


So every time i follow the AMD Instructions to uninstall then install my AMD drivers it fails heres how.
--- Causes ---
To install the drivers i simply, install by
clicking install, then custom, select all drivers(about 8+ drivers), then next/install, then restart and it works fine.
But,
---
Heres how i uninstall then reinstall.
I launch the launch manager.
I click custom.
I click select all, which selects all the drivers( about 8+ drivers/programs)
I click next it uninstalls the drivers.
(In device manager it says I have a missing driver, which makes sense because i just uninstalled a bunch)
It says to restart, i click ok.
-
After restart i open the launch manager i click install
I click custom, i click select all, (!!!!Only about 4 drivers!!!!)
Then next/install
---problems---
After install still, in "Device manager" it says unknown device, and update fails to update.



I also cannot access many features in the AMD catalyst program and it is very buggy



I have tried to do this, about 4 times over 6 months, following the tutorial on the AMD site and I still have never had a successful uninstall/reinstall.
(One time I had a 50+ frames per second boost, with NO noticeable errors at all, untill I restarted and the computer started screeching and lagging.)




To fix my computer i have tried, installing the drivers again, no change.
I have tried going to device manager, and clicking update, it gave me a blue screen error.
I was using AMD overdrive one of the times.

If this Message could do better in another section then please, give me a link to it.]]> Can It Fit? http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160477 2012-08-06T02:21:58 -05.00 Rangergod 3 I want to buy a new graphic Card (Mine is having some SERIOUS problems). However, I don't know if it will fit my laptop. I went to the AMD Site went to notebook drivers. I am a technically savvy person, I don't have much confidence in my works though, so I've come to ask you all.

specs:
OS:Win7 home premium
System type: x86-based pc
Processor: AMD Turion(TM) x2 Dual-Core Mobile RM-72, 2100 Mhz, 2core(2), 2 Logical Processor2
Installed Phy Mem (RAM):3.00GB
Total Virtual Mem:1.88GB
17inch Toshiba Laptop

The Card I am trying to get is:SAPPHIRE Radeon HD 6450 1GB 64-bit DDR3 PCI Express 2.1 x16 HDCP Ready Video Card ( 100322L)
It's Details:

Brand: SAPPHIRE

Model: 100322L

Interface: PCI Express 2.1 x16

Chipset Manufacturer: AMD

GPU: Radeon HD 6450

Core Clock: 625MHz

Stream Processors: 160 Stream Processors

Memory: Effective Memory Clock: 1334MHz

Memory Size: 1GB

Memory Interface: 64-bit

Memory Type: DDR3

DirectX: DirectX 11

OpenGL: OpenGL 4.1

HDMI: 1 x HDMI

D-SUB: 1 x D-SUB

DVI: 1 x DVI

RAMDAC: 400 MHz

Max Resolution: 2560 x 1600

CrossFireX Support: No

Cooler: Fanless

Dual-Link DVI Supported: Yes

HDCP Ready: Yes

Card Dimensions: 5.75" x 3.7"]]> HD6770 only allows30hz refresh options on a 42" 1080p TV that reports edid up to 1080p@70 http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160454 2012-08-04T13:25:27 -05.00 fkez 3
Almost 2 years ago I got a (MSI) 785 board with discrete HD4200 - was a great card. I use it with my TV - 42" Insignia 1080p. [hdmi] OS: WinXP,Ubuntu,Win7

I wanted some more horsepower so I recently got a (MSI) Radeon HD6770. From that point, using the MSI drivers on CD, as well their website I noticed I was only able to use a 60hz option with 768p and lower resolutions. Going higher (and the options were weirdly limited), I could only use higher resolutions at 30hz.

I since have tried all the AMD Catalyst drivers (v12 series) and repeatedly have the same limited options. Though, with the latest 12.7 beta I can also choose 29hz as well 30hz, but to no avail 60hz @ > 768p.

In the Vision Center control panel, I see my TV edid reports "1080p - max refresh: 70hz"

I have in the past few days tested this on both xp32-sp3 and win7-64. Same issue exactly.

I thought perhaps my psu was culprit, so I knew my psu was old and couldn't remember its max output, I upgraded to 650w. Same issue.

I even thought to try another HDMI cable. Same issue.

I am desperate for resolution, I can't find any details on the net regarding this scenario.

Any further info requested is available. I just don't know where to begin.










http://imgur.com/a/QuK80]]> Graphics driver update issue's http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160437 2012-08-03T16:21:52 -05.00 PlayToy 2 (ATI Radeon HD 3200 Graphics (Microsoft Corporation WDDM1.1) card.It says it needs an update and when i use the AMD VISION Engine Control Center to update my graphics go reall screwy.If i play games the words and letters look like some other language,the graphics will start flashing and black lines will be all over the place.I tried different driver programs and the engine control center and they all have the same affect.The only thing different after the update is there is no Microsoft Corporation WDDM1.1at the end of the updated driver.What can i do?Do i completely uninstall the driver and then download the new one or what?]]> 740G/SB700 Windows 8 RAID driver http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160330 2012-07-25T18:54:42 -05.00 aaronabrown 2
I'm trying to install windows 8 to my gigabyte MA74GM-S2 2.0 motherboard system and onto a patriot pyro SSD. I am using the ahcix64s driver version 3.1.1540.127 from gigabyte's website. I found a 3.1.1540.151 version on the AMD chipset drivers page (http://support.amd.com/us/gpud...ges/raid_windows.aspx) but this also shows a 2009 copyright date in the file.

Has anyone had luck installing windows 8 release preview with this driver on their computers? Is there a beta available to test?]]> 3870K 3GHz - Dual Display Problem http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160326 2012-07-25T12:42:41 -05.00 ukphoneguy2000 3
Just purchased a new MOBO / memory & APU as below to replace my ageing rig.

I need dual monitors running as I use the rig as a Karaoke / DJ. In my old giga board I output via the VGA port to Karaoke screens the DVI to my screen.

Problem is no matter how I config this board, I can not get it to see two monitors plugged into the VGA & DVI ports. I know if I enable dual DVI output in the BIOS it disables ALL the other ports, but when I do this I get a max resolution of 860 which can not be changed. If I disable the Radeon driver and use the stock Windows 7 driver I can get full range of resolution !.

I disable the BIOS dual DVI option and the board will not see the DVI monitor but will see it if I plug it into the VGA port.

First system I have built with the FM1 footprint.

Only one Radeon 6550 is showing in device manager... shouldn't there be two?

Is this a fault on the APU or have I over looked something?


Main Hardware Information:
CPU AMD 3870K 3GHz Socket FM1 4MB L2 Cache Retail Boxed Processor
RAM Kingston 2GB DDR3 1600MHz HyperX Blu Memory CL9 1.65V (x2)
Motherboard Gigabyte GA-A75M-UD2H A75 Socket FM1
Video Card Non
PSU 300w

Other Hardware Information :
Monitor Acer P233W
HDD/SSDs Samsung 80GB SATA
Optical Drives

Software Information:
Operating System : Windows 7 x64
Video Card Drivers in Use ( and tried ): MOBO Driver CD (Latest Catalyst)
Motherboard Drivers Used: MOBO Driver CD
System clean of viruses / spyware etc: Clean Install
Other things tried:  Valium - for frustration]]> Help a newbie out - display problems A6 3500 APU http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=160167 2012-07-08T11:26:31 -05.00 jeff_vaughan98203 2 AMD A6 3500 processor -Radeon HD6530D, Vision Engine..
ASRock A75 Pro4 MB, 4GB RAM

Used LCD TV with both HDMI and VGA inputs from computer to configure the system. Found worse resolution on the HDMI than VGA. Turned off VGA output, no real change in quality of HDMI.

Once I thought I was done with configuration, I connected to my LCD projector,and image quality is worse than 1st generation ROKU box at 720p (projector limited to 720p). The image does not fill the entire screen - like Roku did, and the desktop is cut off around the edges.

I've downloaded/updated all drivers (as far as I know..)
I played around with resolution settings with no luck.
Not sure what to try next. Any help is appreciated!]]> Chipset on a Packard Bell ALP Ajax A http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159743 2012-05-17T02:07:29 -05.00 syntaxmovies 2 What to do when you can't find any drivers for this old notebook?
If i install a windows 7, almost everything gets installed, but not the graphics card, on the windows XP it is even worse. But my major problm is the graphics controller.
The data i have fome the Catalyst install package is that the graphics is called ATI Radeon X1200 Advanced micro services, and has the ID 0x791F.

So the Catalyst install package recognises the unit, but does not install x1200 drivers, i also tryied an older package, with no luck.
Does anybody know where to get the drivers? I can't find them on Packard Bells homepage, it's not listed among there notebooks.

Any help is much apreciated.]]> AMD 760 Chipset http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159727 2012-05-15T22:13:24 -05.00 kali19 1
Can someone please tell me what on earth does AMD mean with the 760 (780) chipset ?!
Is it just an updated 780 or is it something new ? I know it supports USB3 so is that it ?


Ps. have tried God Google and come up empty.]]> Chipset 780V http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159536 2012-04-30T16:31:26 -05.00 M-Garces 2

I tried to find out some information about Chipset AMD 780V and it's compatibility to certain processors. I want to upgrade my pc.


So, anybody knows if Chipset AMD 780V works with an AMD Phenom II X6 1065T.

Also does it works to one of this...

AMD Phenom II X4 960
AMD Phenom II X4 B99
AMD Phenom II X4 955

Thanks!!!]]> Can't download drivers for Radeon HD 6750M http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159349 2012-04-11T10:39:16 -05.00 brenigan 1 I wanted to download the lates drivers for my video card....
So I choose component category ----> product line-->product model--->Operating System... and site redirected me to a page where I had to download "AMD Mobility Radeontm Driver Verification Tool"...
I did donwload it, install but whenever i hit start download button it always show me this error

????????? ????????:
??? ??????? ????????: BEX64
??? ??????????: CatalystMobility.exe
?????? ??????????: 1.0.0.1
??????? ??????? ??????????: 4de50d23
??? ?????? ? ???????: MSVCR80.dll
?????? ?????? ? ???????: 8.0.50727.4940
??????? ??????? ?????? ? ???????: 4ca2b4dd
???????? ??????????: 00000000000162b0
??? ??????????: c000000d
?????? ??????????: 0000000000000000
?????? ??: 6.1.7601.2.1.0.768.3
??? ?????: 1049
?????????????? ???????? 1: 1bdf
?????????????? ???????? 2: 1bdfa13d25e5ce607e3d46a04f2e94f7
?????????????? ???????? 3: 32fe
?????????????? ???????? 4: 32fe747f7d4b5565f503add8da687336


It's in russian , but i am pretty sure that it;s the same for any language


IS THERE ANY WAY TO DOWNLOAD DRIVERS MANUALY SOMEHOW??

Tnanks b4hand!]]> bulldozer and msi http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159308 2012-04-07T20:26:29 -05.00 zovert 2 fx 6-core bulldozer shuts down computer suddenly at 50-55 degrees http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159288 2012-04-05T15:39:54 -05.00 KRIS0977 4
ive recently built a new and its runs nice but when iam running certain games it shuts off suddenly its only heating up to around 50-60 degrees all drivers and bois are up to date its even got a nice pea size blob off ic diamond 3 on the cpu, iam also waiting for a scythe ninja 3 heatsink to arrive. iam wondering if the chip is faulty coz these temps aint normal please help guys


AMD 6 CORE 3.3
ASROCK 970 EXTREME
8 GB PNY RAM
MSI NVIDIA 560 TI 2GB
POWERCOOL GTX 750W PSU
GYGABYTE AURORA 3D CHASSIS
LG 3D 23INS MONITOR]]> RaidXpert http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159164 2012-03-26T13:41:17 -05.00 Gl0BAL 1
I'm trying to setup the RaidXpert utility to notfify me via email if there is an issue with the RAID.

I have tried researching this online to no avail.

On the utility configuration screen it prompts for; Email Server, Email Sender, and Email Subject. The issue is i don't see anywhere for a password.

Any suggestions are greatly appreciated.]]> AODDriver4.1 service failed to start http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159117 2012-03-22T11:17:41 -05.00 genegold 3
"The AODDriver4.1 service failed to start due to the following error:
The system cannot find the file specified."

I didn't find anything at these forums, but a google search turns up several people reporting this elsewhere, with some rolling back to 12.1 driver, but no answers from AMD. Consensus is some QA oversight mistake at AMD. Anyone have more information or another suggestion?

Update: Found a fix at http://www.tomshardware.co.uk/...-7000-aoddriver4-error (see last post). The final step, doing a 4.01 registry search after reboot, only turned up Legacy entries, which wouldn't delete and probably don't need to be, since the Admin Events error disappeared.]]> RAID for HP MicroServer (785E ?) on Windows Hyper-V Server Core http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=159113 2012-03-21T19:01:22 -05.00 jason404 6
I am making a fresh installation Windows Hyper-V 2008 R2 Core onto it, and want to make sure that I have the optimum drivers installed. I want to use the chipset RAID with it. I have not used RAID on this server before.

I think the server has the 785E chipset with SB 8X0 southbridge. What software should I have installed?

I have heard that there is some sort of AMD software which will allow me to remotely monitor the RAID health through a web-browser. What should I be using for this functionality?

What I am most concerned with is having chipset RAID-1 functioning on Hyper-V 2008 R2 Core and being able to monitor SMART information remotely, and hopefully get warnings sent through email or Event Monitoring.]]> AMD SATA driver bug introduced after version 1.2.1.317 http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158975 2012-03-10T13:50:58 -05.00 Blasku 7 Thought I'd report a 'little' bug I've experienced: SATA driver version 1.2.1.317 works fine with my eSATA HDD, but if I install 1.2.1.321 or 1.2.1.327 => Win7(x64) doesn't see any eSATA connections at all.
This is on my Acer Travelmate 5530G laptop coupled with a DeLock 42465 enclosure containing a Hitachi TravelStar 7K500. My internal storage is an OCZ Vertex2 120GB (the reason I've tried the AMD driver is to improve performance, now that TRIM is supported not only by MSAHCI driver).
Does anyone have an idea what could've been introduced in the later versions of this driver? I've read something about eSATA and PMP in other topics, but I'm not certain there's a connection with my case.]]> Catalyst 12.1 and AHCI http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158931 2012-03-07T11:41:12 -05.00 dumdum123 2 I also updated the chipsset with version 12.1 and is there not suppose to be some AMD AHCI Driver included ?]]> Max AMD processor upgrade with ASRock ALiveXFire-eSATA2 http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158856 2012-02-29T05:58:41 -05.00 DedenK 4

Now, I have an AMD Athlon 64 X2 6000+ on an ASRock ALiveXFire-eSATA2 motherboard (http://www.asrock.com/mb/overv...l=ALiveXFire-eSATA2).
I'd like to know which is the AMD processor the fastest/the most recent I can install on this motherboard (so, without having to change it).

Thanks, DedenK.]]> Which drivers support TRIM in Windows / in Linux for chipset AMD SB710 http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158846 2012-02-28T07:56:02 -05.00 branstetter 3
I've got a PC with this Asus motherboard which I believe uses AMD SB710 chipset.

Recently I bought this SSD on which I would like to install a multiboot Windows 7 / Ubuntu / Debian and I would like to know which drivers for my chipset support TRIM in Windows and in Linux.

In windows 7 I read that you had to use MS AHCI drivers not AMD AHCI, is it still true ?

And what about Linux ? For example if I use Debian Squeeze with a recent kernel (so that the kernel supports TRIM) do you know by any chance if there are drivers that support TRIM and that I could use ?

Any help and advice would be greatly appreciated.]]> AHCI drivers issue with CQ56-240CA! (5 Views) http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158835 2012-02-27T11:52:35 -05.00 mavris13 3 I am trying to downgrade my laptop(have no choice because the diagnostic software needs XP to work properly) and I get BSOD when the installation finish the loading of drivers. I am trying ti slipstream the proper drivers in the XP installation disc.
I burned about 8 CD until know but knothing is working.
AMD Chipset:785GX
AMD Southbridge: SB800
Can you help me please?
It's weird because HP claim that support this model for XP.

PS. There is not any option on bios to switch on IDE]]> AMD Ahci drivers - Catalyst 12.1 bsod http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158759 2012-02-21T13:55:12 -05.00 Cybmax 8
I ended up changing to IDE mode to be able to boot at all.. uninstalled the AMD drivers completely and enabled MS ahci driver, but now i still bsod whenever i use AHCI mode in the bios.

I have also tried to install an older (11.11) ahci driver, but to no avail. As soon as i enable AHCI mode in bios, the computer only boots with a bsod.

This has been disgussed in a few other places, and seems to be a problem with SB7xx chipsets and the new 12.1 ahci driver, but my main problem is that im in no way able to start the computer with AHCI mode AT ALL. I did not have a old systemrestore, so could not roll back to a previous driver.

Any solution to get back any kind of ahci function? I would think the MSAHCI driver would work, but even tho i disable the AMD_SATA and AMD_XATA services from the registry, and enabling the MSAHCI service, i still get a bsod..

C]]> Video games problem. Crash before intro on FX 8120 Bull http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158713 2012-02-17T04:21:09 -05.00 GreenTaldarin 1
I experienced issues in games. whenever i try to start deus ex human revolution or the darkness 2 blue screen of death appears or the pc freezes in desktop once i double click the game exe. i heard there are alot of problems with the new fx 8120 and i wanted to ask what to do ?? how will i fix my problem ? Update my bios ? i tried with stock power ( 3100 MHz ) and clocked everywhere between 3100 and 4000, nothing. Will updating the bios work ? i have an ASUS mobo and i think its a ASUS M5A78L-M/USB3.

I can't really stay like this knowing that any game coming out in the future could randomly not work without me being able to do anything !

Help ! and thx]]> new laptop processor for hp g60 http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158680 2012-02-15T05:25:43 -05.00 stevediggo 1 AMD APU E-450 Dual Core / HD 6470 M Dual Graphics problem http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158650 2012-02-07T14:52:39 -05.00 HHJA.NOAP 1
I'm posting a topic on a problem I'm experiencing with the E450 APU in combination with a AMD Radeon HD 6470 M.
I tried to run Fable 2 on low settings, but I would only get 20 FPS.
It really felt as if my HD 6470M with 1 GB dedicated Ram wasn't kicking in, switching from the integrated graphics.
Also, I can not find drivers for the APU Fusion E450 any where.

Has any one else experienced the same problems? Honestly my
card should easily be able to play Fable II I've seen people run Modern Warfare 3 on the same specs as my laptop.

I have a Packard Bell Easy Note LK, with 6 GB Ram and a AMD Dual Core E450 with HD 6470 M graphics.
On a side note though, games only detect the integrated graphics; 6320 Series integrated graphics.
I tried running a DxDiag to see if it recognized the Dedicated Vram but it only recognized my video card as 256 MB clocked at 500 MHZ.

Does any one know a solution to this, or some thing I can try?
I tried installing several different versions of Catalyst including those provided by my OEM, but they do not provide drivers for the APU either.

Im kind of clueless as to what I should do, every thing else works fine just not my 3D capabilities.

Awaiting any responses, thanks in advance!]]> Piledriver socket http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158258 2012-01-06T03:06:25 -05.00 L4d 2
The following link brought up some controversy about this subject, so I want to verify this in the official AMD forums:
http://forums.d2jsp.org/topic.php?t=60234750&f=189]]> 990fx sata performans is lover than 890fx.. http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=158252 2012-01-05T17:54:44 -05.00 murdocklawless 2
also I couldn't find drivers for 990fx or sb950 in driver download section?]]> AMD Drivers SB v11.12 Folder Empty? o.O http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=157899 2011-12-25T00:07:25 -05.00 felipeunix 1
But when you unzip the package, the folder should contain the drivers is EMPTY!

anyone see that? help!]]> RAID 5 with RaidXpert unplugged 2 drives and can't reattach http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=157435 2011-12-10T18:44:01 -05.00 BB1 6 At this time I can access the data on the drives.

I initiate the rebuild when it starts having errors on another drive. The rebuild stops at 1% and drops the array (goes offline). At this time I cannot access the data on the drives. I don't know what to do next and am in a bit of a panic. I'm trying to research this and have come up empty handed besides to delete all, and build a new raid array. Goal here is to save the data, not start from scratch.

1. Is it possible to find another way to reattach the disconnected drive without having to rebuild?
2. Is there another software that will control the data on these drives? So far I've only used the RaidXpert which obviously is hellbent on killing all my data.
3. Has anyone taken drives off their mobo and put them into a NAS box to save their data, after the drives became degraded this way?

Thanks in advance for any advice.]]> Unable to update amd chipset driver? http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=157396 2011-12-09T12:06:37 -05.00 w31ha0 2 RE: AMD chipset/boards for Windows 2000 workstation http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=157118 2011-11-30T17:31:54 -05.00 Vorn 1 970 chipset and HT http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=157011 2011-11-27T13:10:30 -05.00 saras_gr 7 exact procedure for install SO in the ssd on the ahci http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=156922 2011-11-24T12:15:22 -05.00 Jody80 6 i have the gigabyte ma790xt-ud4p motherboard (chipset amd 790x and SB 750)
I want install windows 7-64 bit in the new ssd crucial m4.
But i would not know the exact procedure for the driver amd.

1 it must use the pre-install driver ahci? (F6 in the install?)

2 when the SO is install, which driver go installed?
only the first and the third party in this page?
http://support.amd.com/us/gpud...ges/raid_windows.aspx

(i don't have the raid)

thanks
Jody]]> APU E-450 chipset drivers http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=156907 2011-11-24T05:51:17 -05.00 ikerrg 2
I have a new system with an APU E-450/Radeon 6320. I have installed all the Catalyst drivers and features, but Windows 7 still identifies the devices in the "Device Manager" as standard devices (it shows many Standard PCI bridges and USB OpenHCD standard host controllers). These devices could be correctly identified with new chipset .inf files (like Intel does with its chipset driver package). Do you know if there are drivers to correctly detect all these devices in Windows?

Best regards.]]> Suggestions to AMD http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=156783 2011-11-20T21:22:57 -05.00 Tekamd 5
Intel besides triple channel will soon launch serial channel memory architecture, meaning 1 channel per memory slot and that won't stop with 4 channels, so AMD better don't think that their quadruple channel tech is going to be enough.

Make CrossFire cards to work as a single multi-core, memory-shared video subsystem, without duplicating the 3D application in video memory. IMHO that duplicates bandwidth on the PCI-E bus. Why not unify all video cards (GPUs+Memories) in a single logical subsytem so GPUs can cooperate and work on the same application and simply each video card memory would increase the video memory addressable space, will improve performance helping each other and since the data is not duplicated for each video card efficiency would be even greater.

Design a way that SMBus hardware can monitor the buses (Memory channels, PCI-E, Hyper-Link, South Bridge, etc) transfer rates so system monitoring apps can see how well is the system performing and where bottle necks are. Also to detect how many unattended request have been lost because of the bottle necks. Rating could be evaluated to replace PC components for others that would have a rating to fit the need of that system to perform without any lag.

Why is the North-Bridge 16-bit wide? why not 128-bit wide? this width has been sustained since for ever, I don't understand it.

Latest Chipsets dedicate 32X to the PCI-E Bus, no matter how many slots it has, why not give each graphics PCI-E slot 16X, since today max is 4 why not make the Chipsets give 64X to run each PCI-E graphic slot @16X?

Why only 2 separate GPUs in latests AMD graphics cards? why not multi-core GPUs on a single video card? I thought by now AMD would have launched 2 GPUs with 4 cores each... why are GPUs not following CPUs pace? the latest ATI card has only 2 GPUs as a big deal...

Is there any work on progress about this ideas? they're not revolutionary at all so they should have been implemented long ago, I'm a Electronics Engineering student and I thought about them, I'm sure AMD Engineers have and even better ideas, have they? so why they don't implement those ideas?...]]> drivers for A75 chipset and A4-3400 integrated GPU http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=156717 2011-11-18T06:48:36 -05.00 bartgrefte 4
I recently contacted AMD tech support because I was (and still am) unable to find drivers on AMD's website for the A75 chipset and the integrated GPU of an A4-3400 APU, both are not listed in the support&drivers menu.

AMD tech support redirected me to the manufacturer of the motherboard, which to me sounds weird since my experience with motherboard manufacturers is that they only release (sometimes seriously) outdated drivers.

Is there any way I can get more recent drivers somehow (if they are available of course) or am I supposed to be depending on Gigabyte for this?

With regards,

Bart Grefte]]>