So I built my new computer a couple days ago and everything was going wonderfully. I was running Metro: Last Light on maxed out settings with a constant 60+ FPS, just last night. Never was my graphics card going above 72 degrees under full load. It was sitting at around 40-45 at idle.
As everything was going great, I decided I'd leave my computer on overnight to download the remainder of my Steam library. Welp, when I woke up this morning, I went to check on the status of the downloads, and my card wasn't outputting anything. The fans on the card were spinning, and the case was just as cool as when I left it before, but I just had black screens in front of me.
The integrated graphics are working just fine. I turned off the computer and reseated the card and checked the power supply, everything looked fine, but still no output. Do you guys have any suggestions to see if I can save this card or should I just RMA it?
Thanks in advance for your help!
Sapphire R290 Tri-X OC (not overclocked any more than the factory OC)
AMD Catalyst Driver Version, and Driver History
14.4 (No previous driver version installed)
Windows 8.1 Pro (Clean install with all required updates as of 2 days ago)
Motherboard or System Make & Model
Thermaltake Smart M 750W 80+ Bronze
Display Device(s) and Connection(s) Used
2 older HP monitors, one 1080p with HDMI, the other 1400x900 with DVI-D
Intel Core I7 4790
Motherboard BIOS Version
System Memory Type & Amount
Corsair Vengeance 2x4
3 intake fans, one exhaust fan
Ran 3D Mark benchmarks on Wednesday night with no issues