Hello everyone,

I just insatalled win xp 64 bit, and installed the drivers (they support xp 64 bit).

The problem is that after the (succesfull) install, the windows act like there is no drivers. Its pretty much like when you have a fresh windows installation without drivers: when you drag a folder or a properties window, there is lag in motion and laggy visual updates.

 

Any idea in this?

Edited: 12/14/2012 at 11:23 PM by function

Bump.. Anyone?

When you check the driver in the Vision Engine Control Center or Device Manager, does it show the AMD drivers, or does it just show the generic Windows drivers? Can you get the Control Center to launch, and is it present in your right-click menu? Until you can determine if the drivers are actually installed or not, it will be hard to say why you're seeing the lag and such.

-------------------------

AMD Customer Care

The information presented in this document is for informational purposes only and may contain technical inaccuracies, omissions and typographical errors. Links to third party sites are for convenience only, and no endorsement is implie

" alt="" />

 

I didnt installed the Catalyst center, since this software is crap and bloatware; for the love of god, why on earth it has to require the cancer called .net framework??

I have installed just the driver, as done in xp 32 bit, in which everything runs as it should. In another forum I posted the same thread, and others as well had the same problem: http://www.tomshardware.co.uk/forum/283907-35-5800k-problem#t1000323

 

Edited: 01/15/2013 at 06:56 AM by function

XP/XP64 2D acceleration has been bullcrap for ages. It's not your fault and everything works "as intended". The OS is near its end and supported/optimized too much.

-------------------------

CPU: AMD Phenom II X4 810 @ 3250MHz | RAM: Kingmax 2x2GB DDR2 800 @ 833MHz| MoBo: MSI K9A2 CF v1.0 (BIOS: 1.D)| GPU: Asus HD 6850 1024MB (DirectCu) @ 850/1100MHz | Display: L24FHD | PSU: PC Power & Cooling Silencer 750 Quad | OS: MS Windows 95 x64 Edition, Lubuntu 13.04

CPU: Pentium 4 Northwood S478 @ 3200MHz | RAM: 1,5GB DDR 400| MoBo: Gigabyte GA-8S661FXMP-RZ | GPU: Abit Geforce Ti 4200 | Display: Dimarson 19" CRT | PSU: Noname 400W | OS: MS Windows XP Pro, Lubuntu 12.04

No, its not an os problem; 3d benchmark Heaven will pop error, and even winamp's viz at the desktop overlay wont show up at all. As I said in the other forum, my friend din't had this problem

Try an older driver perhaps.

-------------------------

CPU: AMD Phenom II X4 810 @ 3250MHz | RAM: Kingmax 2x2GB DDR2 800 @ 833MHz| MoBo: MSI K9A2 CF v1.0 (BIOS: 1.D)| GPU: Asus HD 6850 1024MB (DirectCu) @ 850/1100MHz | Display: L24FHD | PSU: PC Power & Cooling Silencer 750 Quad | OS: MS Windows 95 x64 Edition, Lubuntu 13.04

CPU: Pentium 4 Northwood S478 @ 3200MHz | RAM: 1,5GB DDR 400| MoBo: Gigabyte GA-8S661FXMP-RZ | GPU: Abit Geforce Ti 4200 | Display: Dimarson 19" CRT | PSU: Noname 400W | OS: MS Windows XP Pro, Lubuntu 12.04

What version is compatible with seres 7xxx?

Most any of the 11.x series, but it really is time to move into this decade and get Windows 7.

-------------------------
Crosshair IV Formula, Phenom II x4 965 w/ Corsair H60, 8 GiB OCZ Platinum DDR3 1600, XFX HD 7970 Ghz, 512GB Vertex 4, 256GB Vector, 240GB Agility 3, Creative X-Fi Titanium w/ Creative Gigaworks S750, SeaSonic X750, HP ZR2440w, Win 7 Ultimate x64

Neither catalyst 11.12, nor 12.8 (already had 12.6) worked out.

Have you tried the beta drivers? I've got them for my 7850 and haven't had any graphic issues since then.

Nope, what version exactly? (keep in mind that I have apu, not discreet graphics card)

Is there anyone who is actual staff of AMD here??

Edited: 01/18/2013 at 01:12 PM by function

The version I'm running is 12.11.

Any fix for this yet? I heard a rummor that new drivers will be rewritten and thus fix many proglems, including the mouse pointer/cursor problems.

 

By the way, whats going on to the amdzone forums, the board says that "Creating a new account is currently not possible". Any idea? I thought posting those matters there will get the attention of the developers of amd, unless I am wrong and it will be just another conversation between users.

Listed several places on the forum...in FAQ..is how to contact AMD with your issues. Look for it here > http://support.amd.com/us/gpudownload/windows/Pages/radeonaiw_xp.aspx

-------------------------

Intel I7 960 @ 3.87ghz *Intel DX58SO *HIS HD6970 2gb *Corsair TX650M *2x4gb Corsair XMS3 *WD Black 1TB *Windows 7 Home Premium 64bit *Gateway HD2401 24" 2ms 1920x1200  ***Asus N71Jq laptop *Intel I7 720QM Processor *Mobility Radeon HD5730 1gb *8gb Ram *Windows 7 64bit  ***Acer 5750 laptop

* A clear conscience is usually a sign of bad memory *

I have the exact same problem. I made this pc using gigabyte cheapest motherboard for fm2 put a A10 5800k and 8 gigs of ddr3 corsair vengeance 1600 cl9 Also coupled with a super fast ezex hardrive from WD( 1tb 1 platter drive) soley for photo editing purposes. 

I need this computer for profesional printing. Windows xp is the only operating system that prints corectly. Windows 7 is bullcrap as it does some sort of cropping to the potos and non end up the dimensions i specified.

 

I have the same problem that "function" explained. The windows are shaky  like theres no driver installed . Also photoshops says theres no renderer posible on the gpu and disables it compleetely leaving only CPU accelearation wich sucks. 

 

Amd please stop giving useless replyes and give us a fix for this . We payed money for this and there are windows xp 64 drivers listed there so it is supported.

 

*Note* i dont have this problem on windows 7 32/64 or windows xp32 and everything works perfect there