I just got a new monitor - AOC E2357Fh, when I plugged it in it left a ~1" black border around the edge, after a bit of fiddling I got the underscan/overscan option to work in the catalist control centre, however it still leaves a 5mm black border around the edge with overscan at 0%. Any help fixing this would be awesome.

My graphics card is an HD5870 if that helps.

Best guess is that you need to adjust the "frame size" option in the OSD of the monitor.

Are you using the native resolution?

CPU: AMD Phenom II X4 810 @ 3250MHz | RAM: Kingmax 2x2GB DDR2 800 @ 833MHz| MoBo: MSI K9A2 CF v1.0 (BIOS: 1.D)| GPU: Asus HD 6850 1024MB (DirectCu) @ 850/1100MHz | Display: Chili Green Vision L24FHD | PSU: PC Power & Cooling Silencer 750 Quad | OS: MS Windows 95 x64 Edition

CPU: Pentium 4 Northwood S478 @ 3200MHz | RAM: 1,5GB DDR 400| MoBo: Gigabyte GA-8S661FXMP-RZ | GPU: Abit Geforce Ti 4200 | Display: Dimarson 19" CRT | PSU: Noname 400W | OS: MS Windows XP Pro, Fedora 18

I trust you are running 1920x1080 over an HDMI cable connection.  If I recall, that is the only way the slider to adjust for scaling will be available to use.  As Thanny suggests, you likely need to adjust a setting on the display itself, using is OSD (on-screen display) menu.

;Marc

AMD Customer Care

The information presented in this document is for informational purposes only and may contain technical inaccuracies, omissions and typographical errors. Links to third party sites are for convenience only, and no endorsement is implied