Hi,

I ordered a gigabyte GA-F2A785XM-D3H board with native AMD usb 3.0 ports, and I can't install drivers for them!

In the device manager, there are two unknown Universal "Serial Bus (USB) Controller" with PID VEN_1022&DEV_7812.
This is the ID for native AMD USB3.0 host controller (confirmed by the gigabyte hotline)

I tried gigabyte installation disk, online drivers, then AMD chipsets drivers... nothing works! 

Finally, I tried to manualy add the driver, using C:\AMD\Support\13-1_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\W764A\amdxhc.inf file but I got an error:" The folder you specified doesn't contain a software compatible.....make sure it is designed to word with windows x64-based system".
I tested all the folders in the USB3.0 directory, even moving the amdxhc.sys in the same level folder as *.inf file (as I read in some MSI forums)

Is there anyway to make usb ports work in whs2011 or Server 2008r2?
Are they compatible with SBS essential 2012?
Thanks 

Server operating systems are not supported by AMD. I suggest you try modding the drivers yourself, maybe you can add support for installation, and they might work if they are binary compatible.

CPU: AMD Phenom II X4 810 @ 3250MHz | RAM: Kingmax 2x2GB DDR2 800 @ 833MHz| MoBo: MSI K9A2 CF v1.0 (BIOS: 1.D)| GPU: Asus HD 6850 1024MB (DirectCu) @ 850/1100MHz | Display: Chili Green Vision L24FHD | PSU: PC Power & Cooling Silencer 750 Quad | OS: MS Windows 95 x64 Edition

CPU: Pentium 4 Northwood S478 @ 3200MHz | RAM: 1,5GB DDR 400| MoBo: Gigabyte GA-8S661FXMP-RZ | GPU: Abit Geforce Ti 4200 | Display: Dimarson 19" CRT | PSU: Noname 400W | OS: MS Windows XP Pro, Fedora 18

Modding the driver?

By modding I mean you open the installation file (.inf) in the package with a text editor and change parameters to what your OS would accept.

CPU: AMD Phenom II X4 810 @ 3250MHz | RAM: Kingmax 2x2GB DDR2 800 @ 833MHz| MoBo: MSI K9A2 CF v1.0 (BIOS: 1.D)| GPU: Asus HD 6850 1024MB (DirectCu) @ 850/1100MHz | Display: Chili Green Vision L24FHD | PSU: PC Power & Cooling Silencer 750 Quad | OS: MS Windows 95 x64 Edition

CPU: Pentium 4 Northwood S478 @ 3200MHz | RAM: 1,5GB DDR 400| MoBo: Gigabyte GA-8S661FXMP-RZ | GPU: Abit Geforce Ti 4200 | Display: Dimarson 19" CRT | PSU: Noname 400W | OS: MS Windows XP Pro, Fedora 18

Do you have any guide or tutorial?

Ok.
Just googled and found I have to replace NTamd64.6.1.1 with NTamd64.6.1!

Now my drivers are installed!  
I'll test them as soon as possible!