After acquiring a 1045T of my friend I've set about OverClocking.. Now, I am a bit new to Bios OC'ing but things seemed to have worked out quite well.
I started off with these settings: 2.7Ghz OC'd to 3.4Ghz.
CPU bus 262, CPU multiplier X13, CPU/NB 2096, OverVoltage 1.350, HT link speed 2096, Dram 1397. I then decided to go some more as the Core(s) temp was only 40-50c under load.
3.6Ghz, CPU bus 277, CPU multiplier X13, CPU/NB 1939, OverVoltage 1.3, HT link speed 1939, Dram 1477. All is stable on my M4A77TD Pro Moboard and temp underload is around 48-53c now that the OverVoltage has been lowered.
After stress testing I went back and raised the HT link speed to 2216Mhz.
AOD bench mark is coming in at 6500 ish.
I think next I'm going to need a Water cooler and a new case, as I've holes drilled into mine and fans Zip tied, Taped and plugged in to it Still it does me well
Well I tell a lie, the actual load temp at 3.6Ghz is 53c on all cores
09:26 PM by